![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: *FLOW-2207-2050KV
"The king of new racing motors is here!"
The powerful and resistant NewBeeDrone Flow 2207 2050KV motors are designed for the race.
They have N54 magnets which are more powerful than the N52 and have been designed and tested by the best NewBeeDrone pilots.
Their design directs air downwards, resultin..
95.90€
Ex Tax:78.61€
Model: GNB13008S120AHV
Gaoneng GNB HV batteries are light and powerful, the best possible ratio to optimize the capabilities of your drone.
This 8S 1300mAh battery has an XT60 connector.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharg..
50.90€
Ex Tax:41.72€
Model: TAA13008S13X6
Tattu R-Line Version 5.0 1050mAh 14.8V 150C 8S1P LiPo battery pack is the updated version of R-Line series. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V5 definitely dominate all your races.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be..
51.90€
Ex Tax:42.54€
Model: TBS-ETHIX-BELL-STOUT-V4-TUMBLED
Replacement motor bell for the Ethix V4 Stout Motors trumbled edition.
Included
1 x ETHIX Mr Steele Stout V4 Spare Bell
1 x Prop Nut
1 x M2 x 3mm screw (Bottom Screw)
Voir plus..
16.90€
Ex Tax:13.85€
Model: GNB11008S120AHV
Gaoneng GNB HV batteries are light and powerful, the best possible ratio to optimize the capabilities of your drone.
This 8S 1100mAh battery has an XT60 connector.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharg..
43.90€
Ex Tax:35.98€
Model: TAA10508S15X6
Tattu R-Line Version 5.0 1050mAh 14.8V 150C 8S1P LiPo battery pack is the updated version of R-Line series. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V5 definitely dominate all your races.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be..
48.90€
Ex Tax:40.08€
Model: FC722PRO
Flywoo"s next generation F722 PRO V2 flight controller not only offers a high-performance 30x30mm STM32F722 main chip, but it also supports 8 motor outputs.
In addition to having an MPU6000 gyro, a DP310 barometer and a 16Mb blackbox, the Plug&Play functionality has been specially designed to link t..
52.90€
Ex Tax:43.36€
Model: FW19002959
Flywoo"s next generation F722 PRO Mini V2 flight controller not only offers a high-performance 20x20mm STM32F722 main chip, but it also supports 8 motor outputs.
In addition to having an ICM42688 gyro, a DP310 barometer and a 16Mb blackbox, the Plug&Play functionality has been specially designed to ..
47.90€
Ex Tax:39.26€
Model: M10-GLONASS-TBS
TeamBlackSheep"s latest GPS module equipped with the last generation M10 chip will provide fast and stable positioning.
Its flash memory will save the configuration and thus save you valuable time for your next flights.
With 72 channels, the M10 will be able to send you all the necessary information..
18.90€
Ex Tax:15.49€
Model: SKY-150756
The F722RS 20x20 flight controller is notably equipped with an OSD, an MPU6000 gyro and a 16MB blackbox.
Specifications
MCU: STM32F722RGT6 216MHz
IMU: MPU6000 (SPI)
OSD: Betaflight OSD & DJI HD OSD (UART6)
6 hardware UARTS (UART1,2,3,4,5,6)
Barometer: NO
Buzzer Pad: YES
5V 3A
Input Voltage: 3..
52.90€
Ex Tax:43.36€
Model: JH61766
This Mamba MK5 F435 55A stack from Diatone has an ICM-42688P gyro, an OSD, a barometer as well as 5 UARTS.
The Mamba F55 BLHeli_S ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK5 F435 FC
MCU: 288 MHz AT32F43..
66.90€
Ex Tax:54.84€
Model: JH61709
This Mamba MK5 G4 6S 40A AIO from Diatone mounts in 25.5x25.5mm and only supports Alpha, not BetaFlight.
HD and analog compatible, this AIO has an OSD, TVS protection and 4 UARTS.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
Specificatio..
100.90€
Ex Tax:82.70€