![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: 5A10088
The Happymodel Mobula8 is a 85mm whoop.
This new UART version brings a new AIO X12 ELRS Pro V1.1.
The built-in VTX and built-in UART ELRS receiver are controlled by the ESP32 chip.
Now you have a free set of UART and you will be able to flash single ExpressLRS firmware for this Mobula8.
Specifica..
131.90€
Ex Tax:108.11€
Model: 3S20167
The Mobula6 2024 is a small 65mm 1S brushless drone, it represents a perfect balance between flexibility and power, ideal for indoor use.
Specifications
Wheelbase : 65mm
Weight : ~2.8g
Color : Transparent black OR transparent white
Recommended propellers (not included): 31mm three-blade or four..
4.90€
Ex Tax:4.02€
Model: LS2UBD
Evan Turner"s brand "Headsup" is coming to your favorite store!
In collaboration with the best pilots, Five33 now offers you the Lightswitch V2 Ultra.
This ultra version, smaller and lighter has proven to give the pilots the competitive advantage and the confidence they need to succeed.
The Lightswi..
51.90€
Ex Tax:42.54€
Model: 3S20154--1
Canopy for the Mobula8 and the Bassline HDZero from Happymodel.
Specifications
Material : PP
Weight : 0.8g
Color : Transparent black
Included
1x Canopy
Voir plus..
4.90€
Ex Tax:4.02€
Model: 3S20162
This mount is intended to hold the FX17-B camera on your Mobula6 2024.
Specifications
Weight : ~0.6g
Color : Transparent black
Included
1x Camera mount
2x M1.2*5 screw
Voir plus..
4.90€
Ex Tax:4.02€
Model: 3S20127--1
Canopy for the Mobula8 and the Moblite7 Walksnail from Happymodel.
Specifications
Material : PP
Weight : 1.4g
Color : Transparent black
Included
1x Canopy
Voir plus..
4.90€
Ex Tax:4.02€
Model: PM20S-2
The PM20S module has a wide operating input range of 9 to 85V with TVS protection.
With a weight of 63g, it is made with 100V DC components.
Specifications
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Vol..
68.90€
Ex Tax:56.48€
Model: CAN-G474
Matek"s CAN-G474 is a Node adapter based on ArduPilot AP-Periph firmware.
With this board, you will be able to more easily use ArduPilot to convert GNSS, Compass, barometers, airspeed sensor, PWM and buzzer devices to DroneCAN devices.
CAN-G474 has STM32G474 chip and 5Mbit/s transceiver.
Spec..
24.90€
Ex Tax:20.41€
Model: GP106036
The GEPRC GEP-M10 series GPS module is defined as small, with fast positioning, stable connection and convenient to use.
It supports GPS + BDS + Galileo + QZSS + SBAS.
The M1025Q has a QMC5883L magnetometer.
Specifications
GPS chip: u-blox M10050
Magnetometer: QMC5883L
Barometer: NO
Input volt..
29.90€
Ex Tax:24.51€
Model: GP106037
The GEPRC GEP-M10 series GPS module is defined as small, with fast positioning, stable connection and convenient to use.
It supports GPS + BDS + Galileo + QZSS + SBAS.
The M1025-DQ has a QMC5883L magnetometer and a DPS310 barometer.
Specifications
GPS chip: u-blox M10050
Magnetometer: QMC5883L..
32.90€
Ex Tax:26.97€
Model: 1I20028-1
Happymodel SE0702 Brushless Motor in 26000KV. The lightest brushless motors all over the world.
You can build an extreme weight tiny whoop with this amazing motors.
Specifications
KV : 28000
Configuration: 9N12P
Stator Diamter: 7mm
Stator Length: 2mm
Shaft Diameter: Φ1mm
Motor Dimension(Dia.*..
10.90€
Ex Tax:8.93€
Model: M10-GLONASS-TBS
TeamBlackSheep"s latest GPS module equipped with the last generation M10 chip will provide fast and stable positioning.
Its flash memory will save the configuration and thus save you valuable time for your next flights.
With 72 channels, the M10 will be able to send you all the necessary information..
18.90€
Ex Tax:15.49€