![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Matek
Model: ASPD-DLVR
The AIRSPEED SENSOR by Matek.
All sensors DLVR series is the best airspeed sensor ArduPilot currently support.
Specifications & Features
ArduPilot AP_Periph F303 CAN node
All sensors DL..
129.90€
Ex Tax:106.48€
Brand: Matek
Model: ASPD-4525
The Matek Digital Airspeed Sensor ASPD-4525 features a ASPD-4525 sensor board, JST-GH to JST-GH 20cm silicon cable, pitot tube and a clear silicon tubing (40cm) to help monitor your wing"s airspeed !
..
60.90€
Ex Tax:49.92€
Brand: Matek
Model: 3901-L0X
Matek System Optical Flow Lidar Sensor 3901-L0X Module Support INAV for RC Drone
Specifications
Optical Flow: PMW3901
Lidar: VL53L0X
Interface UART
Protocol: INAV MSP
Working Range: 8cm~20..
37.90€
Ex Tax:31.07€
Brand: Matek
Model: HCS-150A
This Matek current sensor helps prevent voltage and heat drops on components. It has an operating temperature ranging from -30 to 80°C and has a continuous current rating of up to 150A.
..
21.90€
Ex Tax:17.95€
Model: VIFLY-GPS-MATE
Discover the Vifly GPS-mate, an autonomous power supply for your racer"s GPS chip.
Wiring diagrams:
GPS without compass (Plug):
In this case, just plug in the cable and connect it.
GPS with compass:
With compass, you have to solder the cable via the PAD at the back.
..
17.90€
Ex Tax:14.67€
Brand: Matek
Model: CRSF-PWM-C
Compatible with the CRSF Protocol only, this converter allows you to convert your Crossfire receiver to PWM protocol.
Featuring 6 PWM outputs with a frequency between 50-400Hz, 2x uarts for Receiver and GPS, compatibility with external current sensors and an upgradeable firmware, this PWM converter ..
13.90€
Ex Tax:11.39€
Brand: Matek
Model: DBUZ5V
The Matek super lightweight and compact Lost Model Beeper is powered by an onboard MCU which enables it to output a louder sound than most 5V active buzzers.
The lost model beeper can be used on traditional PWM receivers or racing flight controllers. Simple and easy to set up, this lost model finder..
6.90€
Ex Tax:5.66€
Brand: Matek
Model: MBEC6S
Micro BEC 1.5Amp 5V / 9V from Matek Systems.
Sold by 3pcs
Specifications
High Efficiency Synchronous Step-down regulator
Wide 6V to 3..
10.90€
Ex Tax:8.93€
Brand: Matek
Model: PM12S-3
The PM12S module has a wide operating input range of 9 to 55V with TVS protection.
With a weight of 53g, it is equipped with a Vx BEC, a 5V BEC as well as a 12V BEC...
59.90€
Ex Tax:49.10€
Brand: Matek
Model: BEC12S-PRO
The BEC12S PRO has a wide operating input range of 9 to 55V with TVS protection.
With a weight of 5g, it offers three output voltage options (5.2V/8V/12V)...
23.90€
Ex Tax:19.59€
Brand: Matek
Model: FCHUB-12S-V2
Designed for the XClass, the second version of the Matek FCHUB-12S 440A PDB with 5/12V BEC has an 8pin JST-SH connector as well as a 1K:20K voltage divider.
PDB
Input voltage range: 8~60V..
34.90€
Ex Tax:28.61€
Brand: Matek
Model: MBEC12S
This is the Matek Micro BEC with a wide voltage of 6-60V to 5/9 / 12V...
10.90€
Ex Tax:8.93€