![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: CULT-SMA-TPUDFR
SMA antenna mount for CultureFPV"s LowCULT and HighCULT frames.
Specifications
Easy to install
Flexible TPU to optimize durability an..
3.90€
Ex Tax:3.20€
Model: CULT-GPS-IMMO-PIGT-TPUDFR
GPS, pigtail and Immortal T antenna mount for CultureFPV"s LowCULT and HighCULT frames.
Specifications
Easy to install
Flexible TPU t..
7.90€
Ex Tax:6.48€
Brand: DJI
Model: DJI-AG-P31
Replacement / Spare part for DJI Agras - Flow Body Part 31..
103.90€
Ex Tax:85.16€
Model: ledflexye
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"..
4.90€
Ex Tax:4.02€
Model: lp11047sfp
APC Propeller (left+right)
Delivery
2 piece (left+right)..
9.90€
Ex Tax:8.11€
Model: lipoala
Simple to use Lipoly low voltage alarm that is small and light for on board use, plugs into balance lead for detecting low voltage on individual cells.
A loud alarm will sound and LED will change from Green to Red if any individual cell drops to 3.3v or below.
Perfect voltage alarm for 360 pan g..
12.90€
Ex Tax:10.57€
Model: gbm5208h
iPower Gimbal Brushless Motor GBM5208H-150T Hollow Shaft
Specs:
Model NO.:GBM5208H-180T
Weight:172g
Motor Dimensions:63x25mm
Stator Dimensions:52x8mm
Copper wire(OD):0.27mm
Configuration:12N14P
Resistance:10.2 ohms
Wind type and termination method:Star style
Pre-wounded with 180 turns,Hollow shaft
F..
60.90€
Ex Tax:49.92€
Model: SS000112.01
MavicMini Lower Cover Module
Part: BC.MA.SS000112.01..
8.90€
Ex Tax:7.30€
Model: 802890t
iPower GBM8028-90T
Features:
-Sealed Case to prevent contamination by dust and dirty. -Hollow shaft for slipring -Configuration:36N42P,prove more torque. Specs: -Copper wire (OD):0.20mm Pre-wound with 90 turns. -Internal Resistance:19.3 ohms -Motor Can Dimension:90mm(OD) x 28mm(Height) -Stator D..
194.90€
Ex Tax:159.75€
Model: kwgb10
Specially designed for Kopterworx for heavy cameras.
The strongets motor in the class.
Specifications:Model: KWBG 10Weight: 455g (1.0031lbs)Dimensions: 101×26.5 mmConfiguration: 36N42PMax Voltage: 30VMax Torque: 14 kg/cmFor cameras: Arri alexa; phantom Flex, Double RED 3D..
157.90€
Ex Tax:129.43€