![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: wnkeladapter
With this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter and/or larger mass in the outer regions.
delivery
2 adapters and screws for motor mounting...
7.90€
Ex Tax:6.48€
Model: combicp
This Combi Centerplate can be used to build a Quadro, Y6, Hexa, Hexa (coaxial), Octo or Octo (coaxial) frame- not for a Okto2 frameYou will need two of these Combi Centerplates for a frame.
Technical data
Diameter: about 18cm
Color: black
Material: GFK
Weight: 28g
Scope of Delivery
1 piece..
23.90€
Ex Tax:19.59€
Model: m3x16stoppmutt
Screw M3x16 and lock nut M3
Technical Data
Size: M3x16mm
material: metal
delivery
20 screw M3x16, 20 lock nuts..
5.90€
Ex Tax:4.84€
Model: mutterm3schw
M3 - hex nut similar to DIN 34,814 of PA6.6 black
delivery
10 pieces..
1.90€
Ex Tax:1.56€
Model: gpsshield11
This cover made out of PCB-material is attached directly to the MKGPS board. The side panels are easily connected using solder. This is also the ground plane for the GPS antenna. This increases the GPS reception. The signal to noise ratio for the rest of the electronics in MikroKopter is increased. ..
15.90€
Ex Tax:13.03€
Model: abstandm3x15
Spacers (Bolts)
Technical Data
Size: M3 x 15mm
color: black
delivery
12 pieces..
3.90€
Ex Tax:3.20€
Model: abstandm3x10
Spacers (Bolts)
Technical Data
Size: M3 x 10mm
color: black
delivery
12 pieces..
3.90€
Ex Tax:3.20€
Model: epp11345cf
This version uses chopped glas fiber. This makes the propeller stiffer, but also more brittle.EPP1345 propeller pairRight-and left-rotating propellerWe have also specially manufactured propeller mounts in the shop.
Technical Data
Diameter: 13" (33cm)
Slope: 4.5 "(11.43 cm)
Bore: 5mm
Delivery
1 Pa..
6.90€
Ex Tax:5.66€
Model: epp0845cf
This version uses chopped glas fiber. This makes the propeller stiffer, but also more brittle.EPP0845 propeller pair - Right-and left-rotating propellerWe have also specially manufactured propeller mounts in the shop.
Technical Data
Diameter: 8" (20,32cm)
Slope: 4.5 "(11.43 cm)
Bore: 5mm
Delivery
..
3.90€
Ex Tax:3.20€
Model: tsr12465
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 6,5 V / DC
..
12.90€
Ex Tax:10.57€
Model: tsr12450
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 5 V / DC
Ou..
12.90€
Ex Tax:10.57€
Model: tsr124120
This is a DC/DC-converter with 12V output voltageAttention: not for the use on the FlightControl board - there a 5V type is used!
Technical data according to the manufacturer
Output voltage: 12 V / DC
Output current: 1 A
Type: Traco TSR1-24120
Pitch: 2.54 mm
Input voltage range: 15 - 36V / DC..
13.90€
Ex Tax:11.39€