![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: CINEONC35-GUARDS
These guards for the CineON C35 frame allow it to withstand shocks and the wind.
Included
2x Guard
Note : Frame not included
..
14.90€
Ex Tax:12.21€
Model: STACKABLE-2626-2020
Stackable Carbon support to mount a 20x20 VTX like Caddx Vista on a 26x26 AIO FC.
Specifications
Thickness: 2mm
Mounting: 26x26mm
..
4.90€
Ex Tax:4.02€
Model: CINEONC35-FRAME
The CineON C35 is the frame you need for smooth flying. This Cinewhoop 3.5" Pusher type has guards allowing it to resist shocks as well as the wind.
..
53.90€
Ex Tax:44.18€
Model: CINEONC30-FRAME
The CineON C30 is the frame you need for smooth flying. This Cinewhoop 3" Pusher type has guards allowing it to resist shocks as well as the wind.
..
51.90€
Ex Tax:42.54€
Model: cs8vib
Description
CINESTAR VIBRATION ISOLATOR:
1 - Top Retainer Plate
1 - Bottom Retainer Plate
1 - Top Spacer Plate
1 - Bottom Spacer Plate
7 - O-Rings
2 - 12mm Standoffs
3 - BH M3x8 Screws
3 - BH M3x10 Screws..
75.90€
Ex Tax:62.21€
Model: gryphon6
Power Distribution Board 6 with dual bec for most advanced users.
For HEXA Multicopter (Equipped with 12 pair of 3.5mm plug)
SPECIFICATIONS
- Up to 6 ESC/Motor can be connect to the Board
- 260A (Continuous), 320A (Peak) - 2 layout with 2oz(70um) Copper Dual PCB.
- Gold plated with black soldermask
..
72.90€
Ex Tax:59.75€
Model: ballisoha
Additional ball isolators are available to help tune your quick release anti vibration gimbal mount.
Two isolators per pack. The "Echo" quick release anti vibration mount requires eight isolators for a full set.
 ..
6.90€
Ex Tax:5.66€
Model: verteilerhexax
This is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring effort in building a HexaKopters significantly. The 6 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the ..
36.90€
Ex Tax:30.25€
Model: verteilerouadr
This is a power distribution printed circuit board for 4 BL-Ctrls to build a Quadro XL. The use reduces the wiring effort in building significantly. The 4 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the Fli..
34.90€
Ex Tax:28.61€
Model: verteileroktox
This is a Okto XL power distribution printed circuit board for 8 BL-Ctrls. The use reduces the wiring effort in building a OktoKopters significantly.The 8 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus.You can assemble optional cooling plates. (included in..
38.90€
Ex Tax:31.89€
Model: as150
The AS150 connector system is designed with 7mm Ø for a load capacity of 150A permanently and 200A temporarily and thus covers a wide range of applications.The plug on the ESC side is equipped with an integrated anti-flash and prevents sparking when the flight battery is connected.They can be used f..
8.90€
Ex Tax:7.30€