![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: JH61608
The Reactor 44 ESC supports 4-6S voltage and DSHOT300/600/1200/MAX2400 (FETTEC).
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 44A × 4
Burst: 54A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_44
Soft : DSHOT300/600/1200/MAX2400 (FETTEC)
PWM : 24~128k
Mounting :..
51.56€
Brez DDV:51.56€
Model: SB-BLS35A-V2
4in1 35A BLHeli_S mini V2 ESC has DSHOT 300/600 ESC protocol and supports 3-6S voltage.
Specifications
Firmware : BLHeli_S J-H-40
Co..
35.16€
Brez DDV:35.16€
Model: SKY-150751
Skystars KO50 4in1 ESC comes in 30.5x30.5mm, has BLHeli_S for firmware and supports up to Dshot600.
Specifications
Dimension: 41*46mm..
38.44€
Brez DDV:38.44€
Model: SKY-150748
The Skystars AM60 AM_32 60A 32-bit 3-6S 4-in-1 ESC is a 30x30mm electronic speed controller with a continuous current of 60A and peak current of 70A. The firmware is AM_32 and it supports DShot 600/1200.
..
54.84€
Brez DDV:54.84€
Blagovna znamka: T-Motor
Model: CINE80A-TMOTOR
New T-Motor Cine 80A 4in1 8S ESC for cinelifters.
Equipped with dual TVS protection for perfect stability, the ESC mounts in 30.5x30.5mm and is 4-8S compatible.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
..
258.11€
Brez DDV:258.11€
Model: STACK CINEF760A-TMOTOR
T-Motor F722 60A 8in1 stack, ideal for your Cinelifter.
This aesthetic and practical stack is equipped with three 30x30mm slots to best fix it on your frame.
Note: The stack holes are not through, 3mm maximum will be enough to hold it from below.
Upon receiving your FC,please connect to USB and ..
316.31€
Brez DDV:316.31€
Model: TMOTOR-P60A-V2-4IN1-ESC
New 4in1 ESC from T-Motor, the Pacer P60A V2 is intended for 3-6S. It adapts to a large variety of FC and supports Betaflight, Alpha or EmuFlight, all on a 30x30mm mount.
It is suitable for freestyle, racing, long range or cinematic 5-7" fpv drones.
..
78.61€
Brez DDV:78.61€
Model: AKAKC70A88
This 8in1 8S ESC from Aikon supports BLHeli_32 and can reach a max current of 70A.
Equipped with a shield dissipator on each side, this AKC 70A ESC with a futuristic design is the perfect ESC for your cinelifter in X8 configuration (Siccario, Thicc, QAV-PRO Lifter...).
..
206.48€
Brez DDV:206.48€
Model: XROTOR-45A-20X20
New G2 version of Hobbywing"s 4in1 Xrotor ESC up to 45A!
Specifications
Application : FPVs with 130-280mm Diagonal Wheelbase
LiPo Po..
71.23€
Brez DDV:71.23€
Model: XROTOR-45A-G2-STACK
Here is the Hobbywing combo including the G2 version of the 45A 6S 4in1 ESC with the new F7 flight controller.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
..
113.85€
Brez DDV:113.85€
