![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: nazabluetooth
BTU Module
The Naza-M now provides assistant software for iPhone4s, iPhone5, iPad3, iPad4, iPadmini, iPod5. You can do parameter adjustments at any time on your mobile devices, using only the BTU with a built-in Bluetooth module which makes it easier and convenient. It uses low power Bluetooth to m..
39.90€
Ex Tax:32.70€
Model: antennaext
5.8HGhz antenna extension cable for installing the antenna to the ideal location to enhance wireless reception.
Female SMA to Male RPSMA...
7.90€
Ex Tax:6.48€
Model: herk3tele
Herkules III Telemetry Interface Board to connect your multicopter controller over PPM with your Herkules PowerESC and to get live telemetry data of all important parameters via Graupner Hott, Jeti Duplex etc.All telemetry data is recorded on MicroSD cardHerkules III Telemetry Interface Board with #..
120.90€
Ex Tax:99.10€
Model: herkIII8m
Herkules III 3-6s Brushless ESC - Okto Medium Series
Voltage Range
Battery Voltage: 9-26V (3-6S Lipo)
Current Capability
20A Dauer / 50A Peak per Motor (L-Version)
Control Protocolls
I2C and PPM protocoll up to 450Hz update ratecompatible with Mikrokopter BL1.2 and DJI WKM/NAZA, etc
Reac..
719.90€
Ex Tax:590.08€
Model: s800evomotorbl
Replacement motor for S800 EVO Original DJI.Black Prop CoverStator Size 41×14mm KV 400rpm/V Max Power 500W Weight 158g..
139.90€
Ex Tax:114.67€
Brand: DJI
Model: phantomslefpro
As an innovative extension for the Phantom pilots DJI developed the new self-locking nut with the propeller with integrated advantage of the automatic tightening the propeller during the flight. Furthermore, the assembly is facilitated. With these new propellers, the concern of a parting propeller d..
7.90€
Ex Tax:6.48€
Model: canbus
Can bus hub for DJI Wookong M.To use multiple CAN devices such Zenmuse, IOSD and data link requires you to expand a HUB connections to the CAN bus system...
11.90€
Ex Tax:9.75€
Model: verteilerhexax
This is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring effort in building a HexaKopters significantly. The 6 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the ..
36.90€
Ex Tax:30.25€
Model: tubeho16
CF-tube holder 25-16
Material: aluminium 6061-T6
Total weight: 32.5g
Used aluminium blot
(2)One pair..
46.90€
Ex Tax:38.44€
Model: 583dbirubberdu
A great 3dBi rubber duck antenna. A pair of these (one vertical and one horizontal) is ideal for use with the DUO5800 if you don"t want to invest  in patch antennas just yet.
Frequency range(MHz) - 5725~5850
Bandwidth(MHz)- 125
Gain(dBi) - 3
Polarization - Vertical
Input impedance(Ω) -..
4.90€
Ex Tax:4.02€
Model: gpsshield11
This cover made out of PCB-material is attached directly to the MKGPS board. The side panels are easily connected using solder. This is also the ground plane for the GPS antenna. This increases the GPS reception. The signal to noise ratio for the rest of the electronics in MikroKopter is increased. ..
15.90€
Ex Tax:13.03€
