![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: 38040304
None..
142.90€
Ex Tax:117.13€
Brand: DJI
Model: s800armcwleftg
DJI Frame arm complete for S800 EVO CW and green led..
229.90€
Ex Tax:188.44€
Brand: DJI
Model: s800armccwleft
DJI Frame arm complete for S800 EVO CCW and red led..
229.90€
Ex Tax:188.44€
Model: combicp
This Combi Centerplate can be used to build a Quadro, Y6, Hexa, Hexa (coaxial), Octo or Octo (coaxial) frame- not for a Okto2 frameYou will need two of these Combi Centerplates for a frame.
Technical data
Diameter: about 18cm
Color: black
Material: GFK
Weight: 28g
Scope of Delivery
1 piece..
23.90€
Ex Tax:19.59€
Model: deansultrastec
High current connector Up to 50 - 70A possible DEANS compatible.
scope of delivery
1 male connector..
1.90€
Ex Tax:1.56€
Model: deansultrabuch
One set high current connector Up to 50 - 70A possible DEANS compatible.
scope of delivery
1 female connector..
1.90€
Ex Tax:1.56€
Brand: DJI
Model: djiprops
Adopt PC/ABS ultrastrength material design,fine surface hardness ,anti-impact.
Scope of delivery:2x pair big ones1x pair small ones..
10.90€
Ex Tax:8.93€
Model: ant11dbpatch
One of the best 11 patch antennas for very long range.
U can move antenna in every direction 90/360 degress.
Electrical Specifcation:Frequency 5700-5900 MHzGain 12 dBiHorizontal Beam Width 75 degreesVertical Beam Width 60 degreesSmall dimensions 70x70 mmVery light - 15gOperating Temperature -40° ..
48.90€
Ex Tax:40.08€
Model: combicpcfk
his Combi Centerplate can be used to build a Quadro, Y6, Hexa, Hexa (coaxial), Octo or Octo (coaxial) frame- not for a Okto2 frame You will need two of these Combi Centerplates for a frame.
Technical data
Diameter: about 18cm
Thickness: about 1.1mm
Color: black
Material: Carbon
Weight: ca. 28g
Sc..
45.90€
Ex Tax:37.62€
Model: quadro2xlc
4 ESCs on two boards! Extremely fast brushless controllers version V3 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki ! The board is tested and programmed (including bootloader) Note: The BL-Ctrl 3.0 controller is specifically..
329.90€
Ex Tax:270.41€