![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: 802890t
iPower GBM8028-90T
Features:
-Sealed Case to prevent contamination by dust and dirty. -Hollow shaft for slipring -Configuration:36N42P,prove more torque. Specs: -Copper wire (OD):0.20mm Pre-wound with 90 turns. -Internal Resistance:19.3 ohms -Motor Can Dimension:90mm(OD) x 28mm(Height) -Stator D..
194.90€
Ex Tax:159.75€
Model: tod
Toad In The Hole Quick Release V2, stronger and with safety ring.
The Toad In The Hole Quick Release is a sleek, lightweight, low-profile quick release unit, which provides an easy mount and release solution for your Movi. It allows the operator to remove the Movi from the handle assembly and atta..
347.90€
Ex Tax:285.16€
Model: toadadapt
Purchasing an additional Toad (male adapter) allows for a MÅVI with the Toad In The Hole (female adapter) attached to quickly mount to other filming carriers, such as a crane, jib, or car mount in a matter of seconds. Fiddling around with alignment is not required when engaging the Quick Release -..
88.90€
Ex Tax:72.87€
Model: movirod
MÅVI Rod Mount Adapter
This adapter attaches to the end of the adjustable camera plate and allows for an ultra lightweight and low profile 15mm rod mount. This will allow you to easily mount focus motors without adding unnecessary weight / complexity.
Specs:
Lightweight 6061-T6 aluminum rod moun..
177.90€
Ex Tax:145.82€
Model: kwgb10
Specially designed for Kopterworx for heavy cameras.
The strongets motor in the class.
Specifications:Model: KWBG 10Weight: 455g (1.0031lbs)Dimensions: 101×26.5 mmConfiguration: 36N42PMax Voltage: 30VMax Torque: 14 kg/cmFor cameras: Arri alexa; phantom Flex, Double RED 3D..
157.90€
Ex Tax:129.43€
Model: redboard
This is Redundancy board for DJI and Pixhawk system with:
1. A3-A22. A2-WKM3. A2-Naza v24. WKM - WKM5. WKM - Naza v26. Pixhawk series - Pixhawk series7. DJI - Pixhawk series
You can manually switch between 2 controlers or if something fails on the electronic the board will switch automatic to second..
1,097.90€
Ex Tax:899.92€
Model: movininja
This adapter plate allows for mounting the MÅVI to a variety of accessories. It is designed to replace the top handle of the MÅVI and allow users to mount to Steadicam, Tripods, Jibs, Car Mounts, etc. The plate is lightweight 6061-T6 hard anodized aluminum with laser engraving that calls out mou..
94.90€
Ex Tax:77.79€
Model: 5to12v
5v - 12v Stepup
Clean power to drive 12v cameras
Provides clean power to drive 12v cameras from the 5v outputs of ImmersionRC A/V transmitters. Efficient step-up regulator, with almost no RF emissions. With 250mA max. output current, most typical FPV cameras can be powered.
5v-12v Input Voltage
250..
18.90€
Ex Tax:15.49€
Model: endcassoft25mm
End Cap for Landing Skid (25mm)
Can use for 25mm landing skidMaterial: TPU95A 3D printed ..
13.90€
Ex Tax:11.39€
Model: kw12ballb
Quality German ball bearing for KW12 or Tiger U7.
Delivery 2 pieces...
16.90€
Ex Tax:13.85€
Model: pmb30mm
Profi Motor Mount 30 mm, fi46 with strong clamping force and cooling performance for SkyHero and all FI30mm booms users. Material: aluminium 6061 Item weight : 33.6g (1pcs) / 67.2g(1set) Used for Multi-copter Pipe Dia : 30mm Motor Dia : Max 46mm Include: Upper Mount-1pcs, Lower mount-1 pcs (1set)
..
58.90€
Ex Tax:48.28€
Model: monbracket
Monitor Braket for FPV Pult pro L/S..
15.90€
Ex Tax:13.03€