![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: nazabluetooth
BTU Module
The Naza-M now provides assistant software for iPhone4s, iPhone5, iPad3, iPad4, iPadmini, iPod5. You can do parameter adjustments at any time on your mobile devices, using only the BTU with a built-in Bluetooth module which makes it easier and convenient. It uses low power Bluetooth to m..
39.90€
Ex Tax:32.70€
Model: KW-CL-25
25mm plastic clamps tube clamps/pipe clamps for drones black
Specifications:
Color:blackInner diameter:25mm(for 25mm tube use)Distance between two holes:32mmHeight:30mmScrew hole:M3black color is available...
3.90€
Ex Tax:3.20€
Model: canbus
Can bus hub for DJI Wookong M.To use multiple CAN devices such Zenmuse, IOSD and data link requires you to expand a HUB connections to the CAN bus system...
11.90€
Ex Tax:9.75€
Model: ledflexrt
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"s ..
4.90€
Ex Tax:4.02€
Model: laver
Laver 30mm - M3aluminium 6061-T6 (anodized) Size : 30mm One pair weight: 3.1g..
9.90€
Ex Tax:8.11€
Model: verteilerhexax
This is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring effort in building a HexaKopters significantly. The 6 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the ..
36.90€
Ex Tax:30.25€
Model: tubeho16
CF-tube holder 25-16
Material: aluminium 6061-T6
Total weight: 32.5g
Used aluminium blot
(2)One pair..
46.90€
Ex Tax:38.44€
Model: verteilerouadr
This is a power distribution printed circuit board for 4 BL-Ctrls to build a Quadro XL. The use reduces the wiring effort in building significantly. The 4 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the Fli..
34.90€
Ex Tax:28.61€
Model: mitn6mm3538
MK propeller mount with 6mm hub (M6 winding). Suitable for MK3538.Mounted is the propeller with a 6mm nut and a tooth washer (see pictures).
Delivery
1 propeller mount M6 and additional mounting material (see photo)..
8.90€
Ex Tax:7.30€
Model: wnkeladapter
With this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter and/or larger mass in the outer regions.
delivery
2 adapters and screws for motor mounting...
7.90€
Ex Tax:6.48€
Model: mkusb
MKUSB: USB adapter kit for the MikroKopter (SMD preassembled)This adapter converts USB to serial.It has 2x 10pin connector for direct connection to FlightCtrl, NaviCtrl, MK3Mag or BL-Ctrl.By placing a jumper, the target board can be supplied with 5V if needed.With the MK-USB you can program all cont..
18.90€
Ex Tax:15.49€