Search Criteria
Products meeting the search criteria
Model: T-SHIRT-PERSO
Customize your T-shirt!
Send us your logo and receive it printed on a T-shirt!
Find all the information here.
Choose the color, the logo on the sleeves, and send it along with your HD logo to the email address jimmy@drone-fpv-racer.com with
Once we verify your logo, you will receive a confirmation ..
26.90€
Ex Tax:22.05€
Model: BF15679
Iflight BLITZ series stack with a Blitz mini F722 V1.2 flight controller and a 4in1 mini E55 V1.3 ESC.
This stack is equipped with a DJI HD plug&play connector requiring no soldering as well as quality components that significantly reduce noise!
The stack consists of, among other things, an ICM42688..
127.90€
Ex Tax:104.84€
Model: BF15447
This Iflight stack is mounted in 20*20mm, it consists of an ATF435 FC and an E55 ESC.
This Blitz Mini ATF435 55A has a BMI270 gyro, a DPS310 barometer, an AT7456E OSD chip and supports a 2-6S LiPo voltage.
FC Specifications
MCU: AT32F435RGT7
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flas..
81.90€
Ex Tax:67.13€
Model: B014898
Iflight"s Blitz Whoop 5.8G 2.5W VTX has many features such as a built-in microphone, 4 power levels up to 2500mW, 40 channels or self-checking of output power.
The CNC cooling case and a built-in fan add a double heat dissipation effect on this powerful analog VTX.
* Important note: French regulati..
76.90€
Ex Tax:63.03€
Model: BF15680
The Blitz Mini F722 E55S stack is mounted in 20x20mm, it has quality components to reduce electrical noise.
It is equipped with a connector to connect a VTX HD without soldering. Indicator LEDs also allow visual debugging.
The F722 V1.2 flight controller has an ICM42688 gyro, a DPS310 barometer and ..
105.90€
Ex Tax:86.80€
Model: AR0057588
DJI offers you a tablet support kit to fix the DJI SDR transmission receiver on your tablet.
This support therefore simplifies the installation and connection of the RX DJI SDR transmission to your tablet.
Included
1x DJI SDR Transmission Tablet Holder Kit
1x 22cm USB Type-C to USB Type-C cable..
52.90€
Ex Tax:43.36€
Model: AR005691
Recharge your drone"s battery quickly on your DJI Power charging station using this SDC fast charging cable.
It will allow you to charge the battery of a Mavic 3 in only around 32 minutes or 30 minutes for that of an Air 3.
Two options are offered to you, a cable intended for the batteries of the DJ..
20.90€
Ex Tax:17.13€
Model: THUNDER-2207-2100KV-UNIT
You are looking for race performance, speed and agility?
Xnova"s Black Thunder motors are precisely what you wanted, with their new design, the 2207 motors in 2100KV feature high torque for ultimate efficiency.
Specifications
KV : 2100
No-Load Current (@10V) : 1.4A
Weight : ~31.7g (with wires)..
32.90€
Ex Tax:26.97€
Model: DTTCE70G1
This new ESC 2-8S from Sequre features an innovative design with oblique soldering PADS for better integration and easier soldering of motor wires.
Highlights
PWM frequency up to 128 KHz.
High-quality, high-power MOSFET
Optimized firmware for faster response.
Innovative design, oblique sol..
103.90€
Ex Tax:85.16€
Model: LED-STRIP-32-64
Personalize your drone even further with this addressable LED strip.
You can configure this strip via Betaflight in order to modify each of the LEDs.
Available in two versions : a strip composed of 32 LEDs and another composed of 64 LEDs.
Work on 5V with Led PAD of the FC
Attention
Installation sur..
2.90€
Ex Tax:2.38€
Model: 5A10084
The Moblite7 Walksnail has the AIO SuperX HD ELRS, 1002 20000KV motors and the VTX Avatar mini 1S.
The third version brings some improvements such as an ELRS V3.0 UART, the SuperX HD AIO, a GNB A30 connector and a built-in blackbox.
Specifications
Frame wheelbase: 75mm
Weight: 34.5 gram without..
272.90€
Ex Tax:223.69€
Model: 5A10085
The Moblite7 HDZero has EX1002 motors, the VTX Whoop Lite and HDZero"s nano lite camera.
The V3 has a GNB A30 plug, an AIO superX HD ELRS as well as an onboard blackbox.
Specifications
Frame wheelbase: 75mm
Weight: 31.5 gram without battery
Size: 98mm*98mm*50mm
Receiver : SPI ELRS 2.4G
Compatib..
272.90€
Ex Tax:223.69€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)