Search Criteria
Products meeting the search criteria
Model: 01060009_2--1
The C04 nano camera is intended for BetaFPV"s Cetus X.
It is equipped with an antenna as well as the integrated VTX M04.
Note: Only compatible with Cetus FC version, check that your connector has 3 pins.
* Note importante : La réglementation française impose une puissance maximum de 25mW dans la f..
53.90€
Ex Tax:44.18€
Model: AR0056877
The DJI Power 1000 charging station is THE companion for your adventures.
With a capacity of 1024Wh and a maximum output power of 2200W, this portable DJI station will ensure fast and reliable charging of your DJI drones as well as multiple other devices.
There are 8 outputs: two 220V AC, two USB-A,..
629.90€
Ex Tax:516.31€
Model: DJI-CARE-AVATA-1
DJI Care Refresh provides two replacement units per year for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first replacemen..
49.90€
Ex Tax:40.90€
Model: AR0056623
Transport your DJI Avata 2 drone without any hassle with this DJI sling bag.
You can store the DJI Avata 2, the DJI Goggles 3, the DJI RC Motion 3 as well as the charging hub and your batteries there.
Included
1x Sling Bag
Note : Only the bag is included
Voir plus..
83.90€
Ex Tax:68.77€
Model: AR0056622
Set of ND8, ND16 and nD32 filters for the DJI Avata 2 drone.
The ND filter will reduce the amount of light that enters the camera sensor.
Specifications
Weight : 0.7g / filter
Compatibiltity : DJI Avata 2 drone
Diameter : 26*24mm
Included
1x ND8 filter
1x ND16 filter
1x ND32 filter
Note ..
62.90€
Ex Tax:51.56€
Model: DJI-CARE-AVATA2-2A
DJI Care Refresh provides up to 3 replacements over 2 years per for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first rep..
104.90€
Ex Tax:85.98€
Model: AR0056619
Increase the flight time of your DJI Avata 2 with this smart Li-Ion battery.
Enjoy a battery life of approximately 23 minutes thanks to the voltage of 14.76V and the capacity of 2150mAh.
4 LEDs and a button will allow you to know the battery charge status.
Specifications
Type: Li-Ion
Voltage: 1..
126.90€
Ex Tax:104.02€
Model: AR0056593
This quick release plate from DJI allows you to quickly and easily install your camera on DJI RS stabilizers.
This 2024 version brings an adjustable placement guide that fits below the camera to serve as a stop.
This mount is compatible with DJI RS 4, RS 4 Pro, RS 3, RS 3 Pro and RS 2 stabilizers.
..
13.90€
Ex Tax:11.39€
Model: HEATSINK-O3-NINJA
This heatsink is for the DJI O3 Air Unit.
It enables improved cooling performance for the high power consumption of O3.
Included
1x Heatsink
4x Screw
1x Thermal grease
Note : DJI O3 VTX not included
Voir plus..
5.90€
Ex Tax:4.84€
Model: AR0056621
This hub for the smart batteries of the DJI Avata 2 drone will allow you to charge 3 batteries in sequence (one after the other).
Specifications
Input: 5-20V, 3A max.
Output (energy accumulation): 65W max.
Output (charging): 17V max.
Output (USB): 5V, 2A
Charging type: Charges three batteries i..
63.90€
Ex Tax:52.38€
Model: AR0056592
The DJI BG70 grip is the accessory you need if you want more autonomy on your DJI RS stabilizer.
In addition to recharging in just 2.5 hours, the BG70 supports 18W fast charging and offers an impressive battery life of 29 hours for the DJI RS 4 and 29.5 hours for the DJI RS 4 Pro.
This simple to in..
156.90€
Ex Tax:128.61€
Model: DJI-CARE-AVATA2-1
DJI Care Refresh provides two replacement units per year for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first replacemen..
63.90€
Ex Tax:52.38€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)