![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: elecswitch4c
This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and ..
12.90€
Ex Tax:10.57€
Model: camgopro
CR-Camera Interface Cable for GoPro cameras CAMremote PRO 2
CR-Camera Interface Cable for GoPro, GoPro2 and GoPro3 cameras (GoPro BUS plug, length 30cm/12" - 8g). Controls movie recording, shutter release and camera on/off features of the camera. Composite video is available both in movie and photo ..
43.90€
Ex Tax:35.98€
Model: gditype
Landing Gear I-Type 390mm (LG-3039OT) for OCTO set390mm Landing Gear I-TypeSpecification• Quantity : 4EA• Weight : 90g X 4• OCTO Set..
349.90€
Ex Tax:286.80€
Model: phantpultnolcd
First Profi FPV pult for all Phantoms without LCD holder.
U can reach poti for tilt and batteries on the bottom...
84.90€
Ex Tax:69.59€
Model: 802890t
iPower GBM8028-90T
Features:
-Sealed Case to prevent contamination by dust and dirty. -Hollow shaft for slipring -Configuration:36N42P,prove more torque. Specs: -Copper wire (OD):0.20mm Pre-wound with 90 turns. -Internal Resistance:19.3 ohms -Motor Can Dimension:90mm(OD) x 28mm(Height) -Stator D..
194.90€
Ex Tax:159.75€
Model: tod
Toad In The Hole Quick Release V2, stronger and with safety ring.
The Toad In The Hole Quick Release is a sleek, lightweight, low-profile quick release unit, which provides an easy mount and release solution for your Movi. It allows the operator to remove the Movi from the handle assembly and atta..
347.90€
Ex Tax:285.16€
Model: toadadapt
Purchasing an additional Toad (male adapter) allows for a MÅVI with the Toad In The Hole (female adapter) attached to quickly mount to other filming carriers, such as a crane, jib, or car mount in a matter of seconds. Fiddling around with alignment is not required when engaging the Quick Release -..
88.90€
Ex Tax:72.87€
Model: movirod
MÅVI Rod Mount Adapter
This adapter attaches to the end of the adjustable camera plate and allows for an ultra lightweight and low profile 15mm rod mount. This will allow you to easily mount focus motors without adding unnecessary weight / complexity.
Specs:
Lightweight 6061-T6 aluminum rod moun..
177.90€
Ex Tax:145.82€
Brand: Gens Ace / Tattu
Model: movim5lipo
As Its not possible to get Movi original M5 batteries we found replacment - Gensace battery for Movi M5. Its even better battery, but you need to change connector to XT60 or you need to buy the cable.
NOTE: As the battery is built to be as lightweight as possible, it does not have built in safety ..
43.90€
Ex Tax:35.98€
Model: kwgb10
Specially designed for Kopterworx for heavy cameras.
The strongets motor in the class.
Specifications:Model: KWBG 10Weight: 455g (1.0031lbs)Dimensions: 101×26.5 mmConfiguration: 36N42PMax Voltage: 30VMax Torque: 14 kg/cmFor cameras: Arri alexa; phantom Flex, Double RED 3D..
157.90€
Ex Tax:129.43€
Model: redboard
This is Redundancy board for DJI and Pixhawk system with:
1. A3-A22. A2-WKM3. A2-Naza v24. WKM - WKM5. WKM - Naza v26. Pixhawk series - Pixhawk series7. DJI - Pixhawk series
You can manually switch between 2 controlers or if something fails on the electronic the board will switch automatic to second..
1,097.90€
Ex Tax:899.92€
Model: movininja
This adapter plate allows for mounting the MÅVI to a variety of accessories. It is designed to replace the top handle of the MÅVI and allow users to mount to Steadicam, Tripods, Jibs, Car Mounts, etc. The plate is lightweight 6061-T6 hard anodized aluminum with laser engraving that calls out mou..
94.90€
Ex Tax:77.79€