![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: redboard
This is Redundancy board for DJI and Pixhawk system with:
1. A3-A22. A2-WKM3. A2-Naza v24. WKM - WKM5. WKM - Naza v26. Pixhawk series - Pixhawk series7. DJI - Pixhawk series
You can manually switch between 2 controlers or if something fails on the electronic the board will switch automatic to second..
1,097.90€
Ex Tax:899.92€
Brand: DJI
Model: e6006
DJI E600 Tuned Propulsion System 6-motors
delivery:6x motors6x esc1x accesory box with powerboard5x pair of props
12*4.2" ROTOR
With the state of the art areodynamic efficiency and only nearly half of the inertia product of the normal 12*3.8″ rotor, the 12*4.2″ rotor offers you an outstanding f..
479.90€
Ex Tax:393.36€
Model: tero
The Freefly Tero is a completely new way to move the camera. The system allows for an extremely dynamic low camera angle coupled with full 3-axis control of the MÅVI stabilizer to create never-before-seen shots. With our custom Vibration Isolation System on a car as smooth and agile as this, you’ll..
4,873.90€
Ex Tax:3,995.00€
Model: moviremote
The MōVI Controller is a professional grade remote system that allows the operator full control over Pan, Tilt, and Roll. Compatible with the MōVI M5, M10, M15, and MōVI Pro this controller provides telemetry from the MōVI and allows the user to access MōVI configuration menus to enable on the fly a..
4,135.90€
Ex Tax:3,390.08€
Model: extcom
This is an external compass for connection to the NaviCtrl. This module is used when the compass needs more distance to magnetic interferences. A correct compass value is essential for reliable navigation. The board can be connected to the NaviCtrl V2.1 directly from the Molexkabel. If the ext. ..
50.90€
Ex Tax:41.72€
Model: itelem
iTelemetry Dongle
Telemetry Interface for Smart-Phones and Tablets
iTelemetry Dongle, telemetry interface for smart-phones and tablets. View your model"s position on a live map, while viewing critical flight parameters; Battery status, Uplink status (EzUHF required), Altitude, Distance, etc.
Compat..
20.90€
Ex Tax:17.13€
Brand: DJI
Model: s900upplate
S900 upgrade carbon 3K plate from Kopterworx
• 2mm 3K carbon plate - more then 5 times stronger then DJI plate• No more yello or frame wobling• Adapter for Receiver (Futaba, Graupner, Frsky) or for DJI A2 antennas - 90 degree
Easy to install, u need 1 hexa screw and 10 min...
149.90€
Ex Tax:122.87€
Brand: FrSky
Model: frsky8
FrSky X8R Telemetry RX
The X8R is in a Smaller package then previous 8 channel receivers, but has so much more capability. The new Smart Port supports the new hub-less sensors as well as the older hub analog sensors. The X8R supports 8 standard servo outputs, and you can access all 16 channels by us..
39.90€
Ex Tax:32.70€
Brand: 4Hawks
Model: DJI-lipoPH4HC
Professional aerial imaging benefits from longer flight times. The Phantom 4 Pro has a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO app shows battery lifetime and calculates remaining flight times according to distance traveled and more. I..
189.90€
Ex Tax:155.66€
Brand: Gremsy
Model: gr-la-ge
The Landing gear is used with gStabi H14/H16 gimbal. This is rigid but light weight landing gear set allows you to attach to the H14/H16 at ease while providing unobstructed view from camera with full 360 degree panning.
Qty 8 – Bolt screws M3x8
Qty 1 – Landing Gear
Weight: 254g
Height: 41cm
Diam..
268.90€
Ex Tax:220.41€
Brand: Gremsy
Model: GR-H3-3S
gPower 3S - 3400mAh Battery is used to power the Gremsy H3. Each battery will run the Gremsy H3 for 3-8 hours depending on the particular setup. The battery can be charged using the gPower charger included in the H3 package...
59.90€
Ex Tax:49.10€