Search Criteria
Products meeting the search criteria
Model: F016485
The Nazgul ECO XL5 is a 5" BNF equipped with an analog system and Nazgul F5 propellers.
This powerful drone has pre-installed GPS, BLITZ 1.6W VTX, ExpressLRS 2.4G receiver, XING-E Pro 2207 motors, BLITZ ATF435 flight controller and BLITZ E55S 55A ESC, making the DC5 a must-have quad!
Note: Version V..
321.90€
Ex Tax:263.85€
Model: 0110001139
The all-new Tinyhawk III Plus Freestyle from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of the VTX HDZero Nano Lite system, 1202.5 7000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : ..
292.90€
Ex Tax:240.08€
Model: GP106339
GEPRC"s Cinebot25 is a DJI O3 (not included) compatible 2.5" model that has stable aerial shooting capability as well as unparalleled controllability.
This is the S (sport) version because the Cinewhoop is equipped with SPEEDX2 1505 motors.
An O3 anti-shake design is applied thanks to the dampers wh..
272.90€
Ex Tax:223.69€
Model: GP106338
GEPRC"s Cinebot25 is a DJI O3 (not included) compatible 2.5" model that has stable aerial shooting capability as well as unparalleled controllability.
This is the S (sport) version because the Cinewhoop is equipped with SPEEDX2 1505 motors.
An O3 anti-shake design is applied thanks to the dampers wh..
250.90€
Ex Tax:205.66€
Model: 0110001148
The all-new Tinyhawk III Plus from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of a 0-400mW VTX, TH0802 II 15000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : 76mm
Weight : 32.5g
Moto..
194.90€
Ex Tax:159.75€
Model: 1060008
This camera and VTX are intended for the Cetus Lite from BetaFPV.
With a light weight of 2.47g, this part allows 800TVL resolution and good image quality thanks to the 1/4" CMOS sensor.
Get wide, sublime shots with the 1.8mm lens and 150° FOV.
* Important note: French regulations impose a maximum po..
19.90€
Ex Tax:16.31€
Model: 01060009_2--1
The C04 nano camera is intended for BetaFPV"s Cetus X.
It is equipped with an antenna as well as the integrated VTX M04.
Note: Only compatible with Cetus FC version, check that your connector has 3 pins.
* Note importante : La réglementation française impose une puissance maximum de 25mW dans la f..
53.90€
Ex Tax:44.18€
Model: C0CA-FP010
The first FPV drone from Caddx is here!
The Gofilm 20 is a 2" Cinewhoop drone mainly meeting the needs of most pilots, but also the first 4K starlight drone on the market.
Ideal indoors or outdoors, the Gofilm 20 is equipped with Walksnail"s Avatar Moonlight kit offering video resolution up to 4K at..
461.90€
Ex Tax:378.61€
Model: 0110001147
The all-new Tinyhawk III Plus from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of the VTX HDZero Nano Lite system, TH0802 II 15000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : 76mm
W..
288.90€
Ex Tax:236.80€
Model: 0110003154
Replacement ExpressLRS 2.4G AIO for Tinyhawk III Plus.
Included
1x AIO
1x Power cable with capacitor
Voir plus..
69.90€
Ex Tax:57.30€
Model: 01130003_3
This set of 15 PEEK screws will allow you to reduce the weight of your whoop.
Stronger, stronger and more durable than nylon screws, these screws save up to 0.46g for construction using metal screws.
PEEK screws are therefore perfect for building 65/75mm whoops such as the Meteor.
Included
15x ..
8.90€
Ex Tax:7.30€
Model: SDC-XT60
Connected to the DJI Power Charging Station, this cable powers a battery charger or any other device with a male XT60 connector.
Specifications
Dimensions: 40cm
Connector: SDC
Output connector : XT60 female
Output voltage : 12 volts
Included
1x SDC to XT60 female 12v cable
Voir plus..
23.90€
Ex Tax:19.59€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)