%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: WIRE-SHIELD-RILSAN-TPU
This TPU wire shield helps protect your motor wires from propellers.
In addition, the 3D part has an opening for attaching a Rilsan cable tie.
It has been specially designed to adapt to the majority of 5" frame arms, in addition, it can accommodate 3 wires up to 20 AWG.
Specifications
Easy to i..
5.66€
Ex Tax:5.66€
Model: WIRE-SHIELD-TPU
This TPU wire shield helps protect your motor wires from propellers.
It has been specially designed to adapt to the majority of 5" frame arms, in addition, it can accommodate 3 wires up to 20 AWG.
Specifications
Easy to install
Flexible TPU to optimize durability and protection
Weight : ~7.2g
S..
5.66€
Ex Tax:5.66€
Model: KW-BEC-6S
High Quality, small and light 5V/12V 3A UBEC Support 2-6S/3-6S Lipo Battery Fully Shielded Anti-interference Voltage Stabilizer in Alu housing
Move switch on the side, switch between two output voltages: 5V or 12V
Input voltage: 7-28V (2-6S)Current output: 3AOutput voltage: 5V/12V (switch)Operating ..
12.21€
Ex Tax:12.21€
Model: A007345
Set of 10 x wire cover protection tube, easy and simple to operate, nicer looking, and perfect to protect the wires.
Specifications
Width: 10mm
Length: 43mm / 50mm / 65mm
Color: Grey
Appli..
5.66€
Ex Tax:5.66€
Model: B007505
Set of 10 x wire cover protection tube, easy and simple to operate, nicer looking, and perfect to protect the wires.
Specifications
Width: 5mm
Length: 26mm
Color: Grey
Application: for Mot..
5.66€
Ex Tax:5.66€
Model: SH-H8
Premium quality, super-strong lens protector made from top-quality optical glass for GoPro Hero 8/9.
Bullet Point
Nano-coated hydrophobic, oleophobic, anti-glare
High quality hardened glass..
11.39€
Ex Tax:11.39€
Brand: Diatone
Model: JH60261
Spare GPS Cables for Diatone ROMA L3/F4
Specifications
Length: 110mm /4pin sh1.0
..
3.20€
Ex Tax:3.20€
Brand: Graupner
Model: graupwind
The windshield is designed for the mx and X-series of hand-held transmitters, with good ergonomics in mind. Both the transmitter and your hands are protected from adverse weather conditions such as cold wind, falling snow and light rain. Even when the external temperature is low and the wind icy..
20.41€
Ex Tax:20.41€
Brand: TBS
Model: tbsts
Shield the TBS CORE from any RF-noise that may appear from ESCs or other noisy equipment on board. Also shields the UHF receiver from interference from the TBS CORE. A neat little add-on for the long-range afficionados!..
9.75€
Ex Tax:9.75€
Model: gpsshield11
This cover made out of PCB-material is attached directly to the MKGPS board. The side panels are easily connected using solder. This is also the ground plane for the GPS antenna. This increases the GPS reception. The signal to noise ratio for the rest of the electronics in MikroKopter is increased. ..
13.03€
Ex Tax:13.03€
You have reached the end of the list.