%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: 0110003149
Hardware kit for the Tinyhawk III Plus from Emax.
Included
1x Hardware kit
1x Screwdriver
Voir plus..
5.66€
Ex Tax:5.66€
Model: PUNCH-SHORTY-BACKPACK-1ANTENNA-M10Q
This TPU mount allows you to install one O3 or Walksnail type antenna (tube diameter 4mm) as well as a Matek M10Q GPS on the back of the Piratframes Punch and Shorty frames.
Specifications
Material : TPU
Easy to install
Weight : ~5.2g
Included
1x TPU mount
Voir plus..
5.66€
Ex Tax:5.66€
Model: LC-SRBEAST-TOP-PLATE
Replacement Top Plate for SR-Beast by Lethal Conception.
Sold by one..
13.85€
Ex Tax:13.85€
Model: DFRSOURCEV5-MIDDLE
Middle plate for the DFR Source One 5" V5 frame.
Specifications
Thickness : 2mm
Weight : ~11.1g
Included
1x Middle plate
8x M3 pressnut
Voir plus..
4.02€
Ex Tax:4.02€
Model: 21672
Front split plate intended for QAV-S 2 JohnnyFPV SE frames from Lumenier.
Specifications
Compatibility : QAV-S 2 JohnnyFPV SE 5-7inch
Thickness : 3mm
Orientation : Front
Included
1x Front Split plate
Voir plus..
13.03€
Ex Tax:13.03€
Model: FP12894
Middle plate intended for the AOS 5 EVO frame of AOS RC.
Included
1x Middle plate
Voir plus..
4.02€
Ex Tax:4.02€
Model: CANPDB-4A
This CANPDB from Matek will allow you to plug four CAN devices into one plug.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
6V to 55V Operating Input Range(2S-12S Li-xx)
5.2V output on “5V” p..
15.49€
Ex Tax:15.49€
Model: ARGUS-STACK-55A-PLUG&PLAY
Are you looking for quality and time savings? AxisFlying took care of the welding and offers you this plug & play stack, requiring NO WELDING!
In fact, the cables with the MR30 connectors intended to connect the motors are already soldered to the FC.
All you have to do is mount the ESC and connect t..
137.62€
Ex Tax:137.62€
Model: F90-BELL
Replacement bell for F90 by T-Motor...
14.67€
Ex Tax:14.67€
Model: *V2306.5V2-BELL
Replacement bell for V2306.5 V2 by T-Motor...
8.93€
Ex Tax:8.93€
Model: XAIR-LETSFLYRC-LHCP-X4
This set of four X-AIR 5.8 patch antennas have been specially designed for the LetsFlyRC faceplate.
Specifications
Bandwidth: 5.1GHz-6.7GHz
Gain: 9.5-10.5 dBic
Polarization: LHCP
Beam-width*: 120deg
Beam-width @-3dB**: 68deg.
Connector: U.FL
Dimension: 32 x 32 x 16mm
*Coverage where reception..
101.56€
Ex Tax:101.56€
Model: FACEPLATE-HD-TBS
Faceplate made from durable materials for Fatshark HD2, HD3 and HD0 FPV goggles.
Water resistant, the foam has a velcro backing to attach the faceplate to your goggles.
Specifications
Thickness (foam) : 8mm
Thickness (foam+velcro) : 10mm
Compatibility : HD2 / HD3 / HD0
Included
1x Foam
1x ..
11.39€
Ex Tax:11.39€