![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: JH61302
This Mamba MK4 F722 Mini Reactor 44 stack from Diatone has an MPU6000 gyro, an OSD, a barometer as well as 6 UARTS.
The Reactor 66 ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK4 F722 MINI
MCU: 216MHz STM32..
114.90€
Ex Tax:94.18€
Model: JH61612
This Mamba MK4 F722 Mini Reactor 44 stack from Diatone has an MPU6000 gyro, an OSD, a barometer as well as 6 UARTS.
The Reactor 44 ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK4 F722 MINI
MCU: 216MHz STM32..
111.90€
Ex Tax:91.72€
Model: JH61218
This Mamba F405 Mini F40 BLHeli_S 40A stack from Diatone has an MPU6000 gyro, an OSD, a barometer as well as 6 UARTS.
The 40A ESC supports Dshot300/600.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK4 F405 Mini
MCU: STM32F405
GYRO: MP..
94.90€
Ex Tax:77.79€
Model: BOOSTYBOI
Fractal"s Boostyboi 5V booster will allow you to extend your VTX voltage range on the 1S versions.
Extend flight time and improve the reliability of your video with this voltage booster.
Specifications
Module Properties: non-isolated step-up module (BOOST)
Input voltage: 1.8-5V
Output voltag..
9.90€
Ex Tax:8.11€
Model: TR-BZ-D002
With a plug design and longer wires than its predecessor, the V2 version of this buzzer lets you connect it to any flight controller as long as there"s a free/available port on it.
How to Connect the Buzzer to Poly F405 2S-4S AIO？
You just need to do the wiring as the diagram below. We have alread..
2.90€
Ex Tax:2.38€
Model: SKY-150710--1
The SkyStars F722 HD + KM60 stack includes an F722 HD 30x30 Pro4 flight controller with a MPU6000 gyro along with a KM60A II 32Bit 3-6S 4in1 ESC to give your quad all the power it needs.
FC Specifications
MCU: STM32F722RGT6 216MHz
Gyroscope: MPU6000
Baro:Bmp280
OSD: Betaflight SPI OSD DJI H..
126.90€
Ex Tax:104.02€
Model: BF14874
FC Specifications
MCU: AT32F435CGU7
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFLIGHT_BLI..
84.90€
Ex Tax:69.59€
Model: AXIS-C246-BELL
Spare bell for Axis Flying C246 motors. Compatible for all KVs
Included
1x C246 Motor Bell
Voir plus..
14.90€
Ex Tax:12.21€
Model: 3A30038
Dampers and screws for the Mobula6 frame from Happymodel.
Included
5x Screw
4x Damping ball
Voir plus..
2.90€
Ex Tax:2.38€
Model: GNB15008S120AHV
Gaoneng GNB HV batteries are light and powerful, the best possible ratio to optimize the capabilities of your drone.
This 8S 1500mAh battery has an XT60 connector.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharg..
51.90€
Ex Tax:42.54€
Model: SKIN-DJI-INTEGRA-PSYCH-SPIDER
Bring style to your DJI Goggles Integra !
This Psyche-Spider sticker will perfectly wear your DJI Goggles Integra.
The PVC film used is UV resistant, furthermore it"s rolled to provide a greater sustainability.
With his "Air Free Bubble" system, you will avoid the bubbles during application.
if yo..
20.90€
Ex Tax:17.13€
Model: SKIN-DJI-INTEGRA-BOIL
Bring style to your DJI Goggles Integra !
This Boil sticker will perfectly wear your DJI Goggles Integra.
The PVC film used is UV resistant, furthermore it"s rolled to provide a greater sustainability.
With his "Air Free Bubble" system, you will avoid the bubbles during application.
if you want to..
20.90€
Ex Tax:17.13€