![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: SKY-150754
The KM65A BL32 128k 3-6S 4in1 ESC is a powerful ESC for freestyle and long range drones from 5 to 8".
It supports 3-6S voltage, current up to 65A, telemetry, BLHeli_32, bidirectional DShot and PWM frequency up to 128KHz.
Featuring an aluminum heatsink, the KM65 can be connected to the flight control..
81.90€
Ex Tax:67.13€
Model: JH61223
Here is the Stack Mamba Basic F405 MK2 V2 55A from Diatone.
It consists of an MPU6000 gyro, a 16Mb blackbox, an AT7456E OSD and is mounted in 30.5x30.5mm.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
F405 MK2 V2 FC
MCU: STM32F405
Frequ..
93.90€
Ex Tax:76.97€
Model: ARGUS-STACK-ECO-60A
The Axisflying argus ECO stack is composed of an FC F405 and a BLHeli_S 4in1 60A ESC.
Light and stable, the 30.5x30.5mm stack has an STM32F405RGT6 processor, an ICM42688P gyro, two 5V/3A 12V 2A BECs, 6 UARTS and a 16Mb blackbox.
Get excellent stability for optimal control of your drone thanks to thi..
74.90€
Ex Tax:61.39€
Model: EX2807-1300KV
Rcinpower"s EX2807 1300KV motors are of reliable quality and offer exceptional stability, they will be the solution in terms of power for your 6-7" drone.
Specifications
KV: 1300
Configuration : 12N14P
Stator diameter : 28mm
Stator Length : 7mm
Shaft diameter : 5mm
Dimensions : 34.3*32.9mm (di..
21.90€
Ex Tax:17.95€
Model: CINE80A-12S-TMOTOR
New T-Motor Cine 80A individual ESC for cinelifters.
It supports BLHeli_32 and is 5-12S compatible.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
Bullet points
Tested under 12S voltage, 80A maintains output for 30s
Only 31.2g
Power den..
146.90€
Ex Tax:120.41€
Model: AXIS-SYNCFPV-2207-1860
New 2207.5 motor in 1860KV born from the collaboration between AxisFlying and the pilot SyncFPV.
Ideal for freestyle in bandos, this motor with flashing colors will go perfectly with the BlackBird 4943.5 propellers.
Specifications
KV: 1860
Internal resistance: 58.13mΩ
Shaft diameter: 5mm
Confi..
21.90€
Ex Tax:17.95€
Model: AXIS-SYNCFPV-2207-1960
New 2207.5 motor in 1960KV born from the collaboration between AxisFlying and the pilot SyncFPV.
Ideal for freestyle in bandos, this motor with flashing colors will go perfectly with the BlackBird 4943.5 propellers.
Specifications
KV: 1960
Internal resistance: 58.08mΩ
Shaft diameter: 5mm
Confi..
21.90€
Ex Tax:17.95€
Model: NMB-BEARING-NT
This set of 10 NMB 9x4x4 bearings will allow you to replace those that are too worn in your motors starting to squeak a little too much over crashes with humidity.
Compatible with a large majority of 5" motors, remember to measure your current bearings using a caliper to be sure of the correct sizin..
20.90€
Ex Tax:17.13€
Model: M000590
FlyFishRC"s 3500KV Flash 1804 motors, designed with meticulous attention to detail, performance and reliability are perfect for a 4S configuration.
Made for 3.5" frames, they offer increased power and thrust compared to 1404/1504 while maintaining a compact format.
These motors have been designed wi..
18.90€
Ex Tax:15.49€
Model: M000589
FlyFishRC"s 2450KV Flash 1804 motors, designed with meticulous attention to detail, performance and reliability are perfect for a 6S configuration.
Made for 3.5" frames, they offer increased power and thrust compared to 1404/1504 while maintaining a compact format.
These motors have been designed wi..
18.90€
Ex Tax:15.49€
Model: HARDLINE-2208-1700-UNIT
New series of Hard Line motors from Xnova with this 2208 intended for freestyle and cinematic.
Fully tested and precisely balanced, the motor is simple to tune, is efficient and has a new design with a fully aluminum-encased rotor.
Specifications
KV : 1700
No-Load current (@10V) : 1.3A
Weight ..
36.90€
Ex Tax:30.25€
Model: *CAN-L4-RC
This L4 RC CAN adapter from Matek is based on the ArduPilot AP_Periph firmware and allows you to turn a serial receiver into a CAN receiver.
Specifications
MCU: STM32L431xC, 256KB Flash
1x CAN, DroneCAN Protocol
1x UART(UART3, Tx3/ Rx3)
ST debug, SWCLK & SWDIO
Input voltage range: 4.5~5.5V @..
15.90€
Ex Tax:13.03€