![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Gens Ace / Tattu
Model: 2s3300gens
Spec.
- Product Type:lipo battery pack
- Capacity: 3300mAh
- Voltage: 7.4V
- Max Continuous Discharge: 25C (82.5A)
- Max Burst Discharge: 50C (165A)
- Weight:: 202 g
- Dimensions: 132.89*42.13 *17.55 mm
- Balance Plug: JST-XH
- Discharge Plug: T-plug
- Charge Rate: 1-3C Recommended, 5C Max
Â
Gens a..
17.90€
Ex Tax:14.67€
Model: herk3tele
Herkules III Telemetry Interface Board to connect your multicopter controller over PPM with your Herkules PowerESC and to get live telemetry data of all important parameters via Graupner Hott, Jeti Duplex etc.All telemetry data is recorded on MicroSD cardHerkules III Telemetry Interface Board with #..
120.90€
Ex Tax:99.10€
Model: herkIII8m
Herkules III 3-6s Brushless ESC - Okto Medium Series
Voltage Range
Battery Voltage: 9-26V (3-6S Lipo)
Current Capability
20A Dauer / 50A Peak per Motor (L-Version)
Control Protocolls
I2C and PPM protocoll up to 450Hz update ratecompatible with Mikrokopter BL1.2 and DJI WKM/NAZA, etc
Reac..
719.90€
Ex Tax:590.08€
Top Brand
Brand: TBS
Model: tbslove
TBS Loveseat (antivibration)
Fight vibrations by placing your GoPro Camera on the TBS Loveseat. Fits the front lip perfectly, cushions your GoPro and thus fights vibrations. Made from memory foam, same material that ear plugs are made out of, which has been known since day one to be a good vibra..
8.90€
Ex Tax:7.30€
Model: s800evomotorbl
Replacement motor for S800 EVO Original DJI.Black Prop CoverStator Size 41×14mm KV 400rpm/V Max Power 500W Weight 158g..
139.90€
Ex Tax:114.67€
Brand: DJI
Model: phantomslefpro
As an innovative extension for the Phantom pilots DJI developed the new self-locking nut with the propeller with integrated advantage of the automatic tightening the propeller during the flight. Furthermore, the assembly is facilitated. With these new propellers, the concern of a parting propeller d..
7.90€
Ex Tax:6.48€
Model: canbus
Can bus hub for DJI Wookong M.To use multiple CAN devices such Zenmuse, IOSD and data link requires you to expand a HUB connections to the CAN bus system...
11.90€
Ex Tax:9.75€
Model: ledflexrt
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"s ..
4.90€
Ex Tax:4.02€
Model: laver
Laver 30mm - M3aluminium 6061-T6 (anodized) Size : 30mm One pair weight: 3.1g..
9.90€
Ex Tax:8.11€
Model: verteilerhexax
This is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring effort in building a HexaKopters significantly. The 6 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the ..
36.90€
Ex Tax:30.25€
Model: tubeho16
CF-tube holder 25-16
Material: aluminium 6061-T6
Total weight: 32.5g
Used aluminium blot
(2)One pair..
46.90€
Ex Tax:38.44€
Model: 583dbirubberdu
A great 3dBi rubber duck antenna. A pair of these (one vertical and one horizontal) is ideal for use with the DUO5800 if you don"t want to invest  in patch antennas just yet.
Frequency range(MHz) - 5725~5850
Bandwidth(MHz)- 125
Gain(dBi) - 3
Polarization - Vertical
Input impedance(Ω) -..
4.90€
Ex Tax:4.02€