![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: DJI
Model: djiiosdII
New versin Mark II
Â
Works 100% with Our monitors in combination with S800 and zenmuse!!
comes now with a small extra bord for cameras that have problems connecting directly
to check if your videocamera works also please ask DJI for a list of tested systems
1. Flight data overlay, including Battery..
195.90€
Ex Tax:160.57€
Model: cs8vib
Description
CINESTAR VIBRATION ISOLATOR:
1 - Top Retainer Plate
1 - Bottom Retainer Plate
1 - Top Spacer Plate
1 - Bottom Spacer Plate
7 - O-Rings
2 - 12mm Standoffs
3 - BH M3x8 Screws
3 - BH M3x10 Screws..
75.90€
Ex Tax:62.21€
Model: fpv8
First True FPV LCD for professionals with no blue screen 8 inch.Sun hood included.This version is pro version with HDMI input and normal input.SpecificationPanel size: 8.0 inchResolution: 800×3（RGB）×480
Backlight: LED Disp..
189.90€
Ex Tax:155.66€
Brand: DJI
Model: phantmotor
Original DJI spare motor for new Phantoms 2/vision+ 2312 CW...
30.90€
Ex Tax:25.33€
Model: picloc3xprov2
Picloc-3X PRO
6 servo Outputs ( Refresh rates from 50Hz to 400Hz TurboPWM) - Camera control channels can be output by Picloc over the spare servo outputs
3 types of R/C input control (5x individual r/c channels; 1x PPM_SUM; 1x Spektrum Satellite receiver - compatible with all Spektrum radios)
3x M..
399.90€
Ex Tax:327.79€
Model: may40ask
MT40A-OPTO-V1 - the best ESC controllers for DJI flashed with SimonK firmwareMT40A-OPTO-V1 is a new generation of brushless and sensorless speed controllers with the control of micro processor. Its performance in terms of compatibility, reliability and stability can compete with world famous brands..
21.90€
Ex Tax:17.95€
Brand: Gens Ace / Tattu
Model: gens2700
The best batteries in the world for all MX series of Graupner receivers.
For long working operation with capacity 2700mAh.
And charge rate up to 1A...
13.90€
Ex Tax:11.39€
Model: camrail
ADJUSTABLE CAMERA RAIL for cinestar gimbal:
This upgrade allows the user to easily and precisely slide the camera fore and aft to achieve a perfect balance on the tilt axis.
Additionally, it allows the camera to be easily removed from the gimbal and then re-installed without upsetting the tilt bala..
139.90€
Ex Tax:114.67€
Model: spio58
ImmersionRC have introduced their new skew planar wheel Circularly Polarized SpiroNet antennas. The new design is optimized in terms of radiation pattern and VSWR, the Skew planar wheel design gives you better range and performance in any orientation than the previous clover leaf/skew planner combi..
44.90€
Ex Tax:36.80€
Model: sjdualbat
Droidworx Skyjib 8 "Double Up" Dual Battery Mount v2
With these plates, a pair of large LiPo batteries (i.e. Nanotech, MaxAmps, Zippy, etc.) can be mounted on the heavy-lift Skyjib 8. This will allow for a longer flight time when carrying large cameras like the RED Epic and Canon C300. You will al..
169.90€
Ex Tax:139.26€
Model: cgak
Cinestar Gimbal "Up Armor Kit" Accessory Mounting SystemThe Cinestar Gimbal from Freefly Systems does not provide any surfaces or holes for mounting the necessary accessories needed to actually operate the gimbal. So instead you are forced to resort to zipties and servo tape. For the professionals..
70.90€
Ex Tax:58.11€