![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Gens Ace / Tattu
Model: 2s3300gens
Spec.
- Product Type:lipo battery pack
- Capacity: 3300mAh
- Voltage: 7.4V
- Max Continuous Discharge: 25C (82.5A)
- Max Burst Discharge: 50C (165A)
- Weight:: 202 g
- Dimensions: 132.89*42.13 *17.55 mm
- Balance Plug: JST-XH
- Discharge Plug: T-plug
- Charge Rate: 1-3C Recommended, 5C Max
Â
Gens a..
17.90€
Ex Tax:14.67€
Model: herkIII8m
Herkules III 3-6s Brushless ESC - Okto Medium Series
Voltage Range
Battery Voltage: 9-26V (3-6S Lipo)
Current Capability
20A Dauer / 50A Peak per Motor (L-Version)
Control Protocolls
I2C and PPM protocoll up to 450Hz update ratecompatible with Mikrokopter BL1.2 and DJI WKM/NAZA, etc
Reac..
719.90€
Ex Tax:590.08€
Top Brand
Brand: TBS
Model: tbscor25
TBS Core PNP25
The TBS CORE PNP25 is a consequent progression to the TBS CORE, tailor made for lightweight FPV aircraft such as the TBS CAiPiRINHA. The main advantage over the standard CORE is the connectors and supplied cables. No more soldering required to install this puppy. It supplies a (..
99.90€
Ex Tax:81.89€
Top Brand
Brand: TBS
Model: tbsbullet4
TBS Bulletproof 30A ESC set (4 pcs.)
Simply put the best ESC you can get for your multirotor. Period.
Flashed with a custom blend of the famous SimonK OpenSource Firmware for super-fast throttle response, which makes your quad fly "locked in". Suited for quads up to 2.5kg, octos up to 5kg. Even com..
109.90€
Ex Tax:90.08€
Model: s800evomotorbl
Replacement motor for S800 EVO Original DJI.Black Prop CoverStator Size 41×14mm KV 400rpm/V Max Power 500W Weight 158g..
139.90€
Ex Tax:114.67€
Model: kw30esce
New advanced esc specialy made for our customers
This esc will not let u down on the field. DJI 100% compatible and preprogrammed. Just plug and play.Some Features:- 30A burst 40A- 3 to 4s- lightweight- Extreme low output resistance, super current endurance.- Multiple protection features: Low-volta..
15.90€
Ex Tax:13.03€
Model: canbus
Can bus hub for DJI Wookong M.To use multiple CAN devices such Zenmuse, IOSD and data link requires you to expand a HUB connections to the CAN bus system...
11.90€
Ex Tax:9.75€
Model: ledflexrt
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"s ..
4.90€
Ex Tax:4.02€
Model: laver
Laver 30mm - M3aluminium 6061-T6 (anodized) Size : 30mm One pair weight: 3.1g..
9.90€
Ex Tax:8.11€
Model: verteilerhexax
This is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring effort in building a HexaKopters significantly. The 6 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the ..
36.90€
Ex Tax:30.25€
Model: tubeho16
CF-tube holder 25-16
Material: aluminium 6061-T6
Total weight: 32.5g
Used aluminium blot
(2)One pair..
46.90€
Ex Tax:38.44€
Model: 583dbirubberdu
A great 3dBi rubber duck antenna. A pair of these (one vertical and one horizontal) is ideal for use with the DUO5800 if you don"t want to invest  in patch antennas just yet.
Frequency range(MHz) - 5725~5850
Bandwidth(MHz)- 125
Gain(dBi) - 3
Polarization - Vertical
Input impedance(Ω) -..
4.90€
Ex Tax:4.02€