![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: GP105892
The Taker stack consists of an FC F722 SE with MPU6000 gyro and a 4in1 E55_96k BLHeli_32 55A ESC.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
FC
MCU: STM32F722RET6
IMU: MPU6000
Black Box: 32Mb Flash
USB: Type-C
OSD: BetaFlight OSD w/..
119.90€
Ex Tax:98.28€
Model: GP106347
GEPRC"s AIO TAKER G4 45A adopts G473 main control.
Following market demands, the Type-C interface has been improved and everything has been optimized to make soldering easier.
The Taker G4 45A mounts in 25.5x25.5mm, has an ICM42688P gyro, AT7456Ev OSD, 5V 3A BEC and supports Dshot600, Oneshot and Mu..
76.90€
Ex Tax:63.03€
Model: SKY-150759
The Skystars Uranus single ESC is a standalone ESC intended for freestyle drones and airplanes.
It supports 3-6S power supply and can handle current up to 35A.
Its BLHeli_32 firmware supports PWM frequency up to 128KHz, ensuring smooth motor operation even at high speeds.
Note : This ESC does not h..
15.90€
Ex Tax:13.03€
Model: FW19002978
Flywoo"s next generation F722 PRO Mini V2 flight controller not only offers a high-performance 20x20mm STM32F722 main chip, but it also supports 8 motor outputs.
Combined with the GOKU G45M 4in1 ESC, it forms a high-performance mini stack equipped with an ICM42688 gyro, a 16MB blackbox or even a 10V..
81.90€
Ex Tax:67.13€
Model: GP106088
GEPRC"s AIO TAKER G4 35A adopts G473 main control.
Following market demands, the Type-C interface has been improved and everything has been optimized to make soldering easier.
The Taker G4 35A mounts in 25.5x25.5mm, has an ICM42688P gyro, AT7456Ev OSD, 5V 3A BEC and supports Dshot600, Oneshot and Mu..
67.90€
Ex Tax:55.66€
Model: SKY-150755
The SkyStars F722 HD + KM65 stack includes an F722 HD 30x30 Pro4 flight controller with a MPU6000 gyro along with a KM65A BLHeli_32 3-6S 4in1 ESC to give your quad all the power it needs.
F722 HD Pro4 FC
MCU: STM32F722RGT6 216MHz
Gyroscope: MPU6000
Baro:Bmp280
OSD: Betaflight SPI OSD DJI HD O..
133.90€
Ex Tax:109.75€
Model: JH61766
This Mamba MK5 F435 55A stack from Diatone has an ICM-42688P gyro, an OSD, a barometer as well as 5 UARTS.
The Mamba F55 BLHeli_S ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK5 F435 FC
MCU: 288 MHz AT32F43..
66.90€
Ex Tax:54.84€
Model: DV6S1PTI
Made in France, this 6S 4000mAh Li-Ion battery has been designed for use on FPV drones as part of Long Range.
Its triangular format provides better weight distribution across the entire drone.
It consists of Samsung INR 21700 batteries, a 6S balancing connector, an XT60 connector, a quality silicone..
84.90€
Ex Tax:69.59€
Model: VTC5A-2600
The Sony VTC5A battery has an autonomy of 2600mAh and a pulse discharge current of 35A (20A continuous).
Caution: It is imperative to transport your batteries in suitable cases to avoid any incident.
Store them away from heat sources as well and use a suitable charger to prevent short circuiting or ..
8.90€
Ex Tax:7.30€
Model: SB-BLS35A-V2
4in1 35A BLHeli_S mini V2 ESC has DSHOT 300/600 ESC protocol and supports 3-6S voltage.
Specifications
Firmware : BLHeli_S J-H-40
Co..
42.90€
Ex Tax:35.16€