Search Criteria
Products meeting the search criteria
Model: T014716
The Commando 8 Iflight radio with fully integrated ExpressLRS is now available in Lite version.
Also equipped with a TCXO crystal oscillator, the Commando 8 Lite is much lighter than the original (~280g).
The SMD antenna is integrated and the gimbal is removable, which makes portability and transpor..
72.87€
Ex Tax:72.87€
Model: VCI-22034-2550KV
Discover Vulcan Innovation and its 2203.4 motors.
These 2550KV motors offer precise control and a very fast response time.
Their reduced body provides unparalleled agility, even in tight spaces.
The VCI Spark 2203.4 have a M5 nut shaft and will be perfect combined with the Gemfan D90-3 propellers.
..
17.95€
Ex Tax:17.95€
Model: VCI-0702-27000KV
Discover Vulcan Innovation and its 0702 motors intended for micro whoops.
These 27000KV motors offer precise control and a very fast response time.
Their reduced body provides unparalleled agility, even in tight spaces.
The VCI Spark 0702 have a 1mm pressure shaft and will be perfect combined with 3..
31.89€
Ex Tax:31.89€
Model: VCI-0702-29000KV
Discover Vulcan Innovation and its 0702 motors intended for micro whoops.
These 29000KV motors offer precise control and a very fast response time.
Their reduced body provides unparalleled agility, even in tight spaces.
The VCI Spark 0702 have a 1mm pressure shaft and will be perfect combined with 3..
31.89€
Ex Tax:31.89€
Model: F4-55A-FLYTOWER
The Aikon F4 55A stack consists of an F405 flight controller and a 55A ESC.
This 30x30mm stack supports 3-6S voltage, BLHeli-S firmware and has an OSD and a 16Mb SPI blackbox.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
FC
MCU : STM32..
77.79€
Ex Tax:77.79€
Model: VALKYRIE-MINI-ARM-TPUBYDFR
Arm protections for the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~6.3g (4pcs)
Included
1x Set of 4pcs
Voir plus..
7.30€
Ex Tax:7.30€
Model: DTTCE70G1
This new ESC 2-8S from Sequre features an innovative design with oblique soldering PADS for better integration and easier soldering of motor wires.
Highlights
PWM frequency up to 128 KHz.
High-quality, high-power MOSFET
Optimized firmware for faster response.
Innovative design, oblique sol..
85.16€
Ex Tax:85.16€
Model: C8X4.5B-GRN
HQProp Cine8 8x4.5 propellers in glass fiber reinforced nylon.
Specifications
Propeller Diameter: 8 inch
Pitch : 4.5
Blades : 2
Material : Glass Fiber Reinforced Nylon
Weight : 10g
Hub Diameter : 15.3mm
Hub Thickness : 8mm
Shaft : 5mm
Adaptor R..
5.66€
Ex Tax:5.66€
Model: ANT-T-UFL-DFR
UFL 2.4GHz T antenna for ELRS receivers.
A small notch on the T allows a Rilsan cable to be passed through to better fix the antenna on the droine.
Available in two sizes, 50mm or 100mm.
Specifications
Connector : UFL
Size : 50mm or 100mm (optionnal)
Weight : 1.3g (50mm) / 1.6g (100mm)
Inclu..
4.02€
Ex Tax:4.02€
Model: LR8X4.2X3B-GRN
HQProp Long Range 8x4.2x3 propellers in glass fiber reinforced nylon.
Specifications
Propeller Diameter: 8inch
Pitch : 4.2
Blades : 3
Material : Glass Fiber Reinforced Nylon
Weight : 11.2g
Hub Diameter : 13.7mm
Hub Thickness : 8mm
Shaft : 5mm
Adaptor Rings : ..
8.11€
Ex Tax:8.11€
Model: CINE7B-GRN
HQProp Cine7 7x4x3 propellers in glass fiber reinforced nylon.
Specifications
Propeller Diameter: 7inch
Pitch : 4
Blades : 3
Material : Glass Fiber Reinforced Nylon
Weight : 10.3g
Hub Diameter : 13mm
Hub Thickness : 6.8mm
Shaft : 5mm
Adaptor Rings : NO
Inc..
4.84€
Ex Tax:4.84€
Model: 5A10090
The Mobula6 ECO 2024 is a 65mm HDZero whoop consisting of the new HDZero ECO VTX and an AIO with ExpressLRS 2.4G receiver.
This small 1S brushless drone weighing only 17.7g is a perfect balance between flexibility and power, ideal for indoor use.
Compatible with 1S LiPo/LiHV, the Mobula6 ECO 2024 al..
154.84€
Ex Tax:154.84€