%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: 01050010_3
BetaFPV"s 0702SE motors weigh only 1.42g, combined with propellers such as the 1210-2 or 1208-3, they will offer superior flight performance to your 65mm whoops.
The 0702SE in 23000KV have a 1mm pressure shaft, a 35mm 30 AWG connector cable and are made of durable materials.
Specifications
KV..
44.18€
Ex Tax:44.18€
Model: TAA4502S95X3L
Highly appreciated by Racers, Tattu brand Lipos offer excellent value for money, with discharge rates well suited to Drone Racers.
This long size 2S 450mAh battery has an XT30 connector and a discharge rate of 95C.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used ..
8.93€
Ex Tax:8.93€
Model: MULTITOOL-NINJA
This tool will allow you to test your LiPos from 1S to 12S as well as your servos if you are a fan of flying wings.
The tester is equipped with two plugs for servos (1 input / 1 output), pins for balance plugs for your LiPo batteries, a wheel for scrolling through the menu and a color screen.
This m..
17.95€
Ex Tax:17.95€
Model: VIFLY-TOOTHSTOR
The ToothStor from Vifly is a charger intended for 2S batteries.
You can charge up to four batteries equipped with BT3.0 or XH2.54 connectors simultaneously.
In addition to charging the battery at full voltage, you will be able to charge or discharge it to storage voltage for long-term storage.
The ..
32.70€
Ex Tax:32.70€
Model: NBD1352-1
Fly free, fly far with the SavageBee HD O3, a marvel of engineering that packs the power of a full-sized drone into a nimble 2.5-inch tri-blade propeller framework.
This 2.5" drone from NewbeeDrone integrates the power of a full size drone into a 2.5" frame. Weighing just 84 grams (without battery),..
309.75€
Ex Tax:309.75€
Model: 0110001142
The all-new Tinyhawk III Plus Freestyle from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of a 0-400mW VTX, 1202.5 7000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : 110mm
Weight : 62...
167.95€
Ex Tax:167.95€
Model: NBD1351-1
Fly free, fly far with the SavageBee HD O3, a marvel of engineering that packs the power of a full-sized drone into a nimble 2.5-inch tri-blade propeller framework.
This 2.5" drone from NewbeeDrone integrates the power of a full size drone into a 2.5" frame. Weighing just 84 grams (without battery),..
295.00€
Ex Tax:295.00€
Model: 0110001139
The all-new Tinyhawk III Plus Freestyle from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of the VTX HDZero Nano Lite system, 1202.5 7000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : ..
240.08€
Ex Tax:240.08€
Model: 0110001148
The all-new Tinyhawk III Plus from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of a 0-400mW VTX, TH0802 II 15000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : 76mm
Weight : 32.5g
Moto..
159.75€
Ex Tax:159.75€
Model: 0110001147
The all-new Tinyhawk III Plus from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of the VTX HDZero Nano Lite system, TH0802 II 15000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : 76mm
W..
236.80€
Ex Tax:236.80€
Model: 5A10088
The Happymodel Mobula8 is a 85mm whoop.
This new UART version brings a new AIO X12 ELRS Pro V1.1.
The built-in VTX and built-in UART ELRS receiver are controlled by the ESP32 chip.
Now you have a free set of UART and you will be able to flash single ExpressLRS firmware for this Mobula8.
Specifica..
108.11€
Ex Tax:108.11€
Model: X-FW080012-E1D1-01
This Flycolor single ESC has aluminum heat sinks, multiple protections (current, temperature etc...) and supports all Dshot and Proshot protocols.
Equipped with the ARM 32-bit Cortex MCU, the X Cross 80A supports frequency up to 64MHz, which is 25% higher than the previous generation MCU.
Specif..
71.23€
Ex Tax:71.23€