![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: GP106338
GEPRC"s Cinebot25 is a DJI O3 (not included) compatible 2.5" model that has stable aerial shooting capability as well as unparalleled controllability.
This is the S (sport) version because the Cinewhoop is equipped with SPEEDX2 1505 motors.
An O3 anti-shake design is applied thanks to the dampers wh..
250.90€
Ex Tax:205.66€
Model: 0110001148
The all-new Tinyhawk III Plus from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of a 0-400mW VTX, TH0802 II 15000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : 76mm
Weight : 32.5g
Moto..
194.90€
Ex Tax:159.75€
Model: 5A10087
The Mobula6 2024 is a 65mm analog whoop composed of the new AIO SuperX with ExpressLRS 2.4G receiver and OpenVTX 5.8G.
This small 1S brushless drone weighing only 17.7g is a perfect balance between smoothness and power, ideal for indoor use.
Compatible with 1S LiPo/LiHV, the Mobula6 2024 also consis..
144.90€
Ex Tax:118.77€
Model: C0CA-FP010
The first FPV drone from Caddx is here!
The Gofilm 20 is a 2" Cinewhoop drone mainly meeting the needs of most pilots, but also the first 4K starlight drone on the market.
Ideal indoors or outdoors, the Gofilm 20 is equipped with Walksnail"s Avatar Moonlight kit offering video resolution up to 4K at..
461.90€
Ex Tax:378.61€
Model: 0110001147
The all-new Tinyhawk III Plus from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of the VTX HDZero Nano Lite system, TH0802 II 15000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : 76mm
W..
288.90€
Ex Tax:236.80€
Model: 5A10084
The Moblite7 Walksnail has the AIO SuperX HD ELRS, 1002 20000KV motors and the VTX Avatar mini 1S.
The third version brings some improvements such as an ELRS V3.0 UART, the SuperX HD AIO, a GNB A30 connector and a built-in blackbox.
Specifications
Frame wheelbase: 75mm
Weight: 34.5 gram without..
272.90€
Ex Tax:223.69€
Model: 5A10085
The Moblite7 HDZero has EX1002 motors, the VTX Whoop Lite and HDZero"s nano lite camera.
The V3 has a GNB A30 plug, an AIO superX HD ELRS as well as an onboard blackbox.
Specifications
Frame wheelbase: 75mm
Weight: 31.5 gram without battery
Size: 98mm*98mm*50mm
Receiver : SPI ELRS 2.4G
Compatib..
272.90€
Ex Tax:223.69€
Model: 5A10088
The Happymodel Mobula8 is a 85mm whoop.
This new UART version brings a new AIO X12 ELRS Pro V1.1.
The built-in VTX and built-in UART ELRS receiver are controlled by the ESP32 chip.
Now you have a free set of UART and you will be able to flash single ExpressLRS firmware for this Mobula8.
Specifica..
131.90€
Ex Tax:108.11€
Model: 01010039
Defy gravity and embark on an unforgettable journey with the Air65!
More impressive and more efficient than the Meteor series, this 65mm whoop weighs only 17g and is available in two versions.
The first is an Air65 with a propulsion system for Racing, it is equipped with 0702SE 27000KV motors and Ge..
120.90€
Ex Tax:99.10€
Model: 01010038_2
Defy gravity and embark on an unforgettable journey with the Air75!
More impressive and more efficient than the Meteor series, this 75mm whoop weighs only 21g.
The Air75 has the first AIO using the G473 processor. It seamlessly integrates FC, ESC, OSD and VTX.
We recommend using a 1S 450mAh battery...
120.90€
Ex Tax:99.10€
Model: HP0157.RX-GR-01
Take control of your RS gimbal and elevate your cinematic game with the GR-01 from RadioMaster.
The GR-01 ExpressLRS 2.4G receiver was developed for Cinelifter setups that use the DJI RS2 and RS3 Pro gimbal platforms.
The GR-01 features a sturdy aluminum case and built-in USB-C interface for simple ..
57.90€
Ex Tax:47.46€
Model: 01040015_1
This AIO F4 2-3S 20A V1 from BetaFPV is specially designed for VTX HD.
This powerful controller integrates an STM32F405RGT6 MCU and dual BEC 9V 12A for DJI O3 and 5V 3A for external devices.
It is equipped with an integrated ExpressLRS 2.4G receiver, a 16MB blackbox and a barometer.
Specificatio..
62.90€
Ex Tax:51.56€