%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: SDC-XT60
Connected to the DJI Power Charging Station, this cable powers a battery charger or any other device with a male XT60 connector.
Specifications
Dimensions: 40cm
Connector: SDC
Output connector : XT60 female
Output voltage : 12 volts
Included
1x SDC to XT60 female 12v cable
Voir plus..
19.59€
Ex Tax:19.59€
Model: HM-SB
HiModel 6-50V Input 20A Large Current Switching Mode Voltage Regulator/ SBEC
HiModel 20A SBECInput: 6 - 50.4 VOutput voltage: 7.4V 8.4V 9V 12V OUTPUT (jumper selection)Current: 20amps continuous/ 25amps peak (2 seconds)Mode: Switch-modeQuiescent current: 60uA to 200uASize: 45 x 26 x 8mmWeight: 30g..
30.25€
Ex Tax:30.25€
Model: FF-AX-12V
Installs on the Alta X (replaces blank side panel) to allow integrated, on-board, power for 12V accessories from the main batteries.
Features
XT30 Female connector for powering accessories
Pulls power from flight packs to simplify battery needs..
268.77€
Ex Tax:268.77€
Model: KW-BEC-6S
High Quality, small and light 5V/12V 3A UBEC Support 2-6S/3-6S Lipo Battery Fully Shielded Anti-interference Voltage Stabilizer in Alu housing
Move switch on the side, switch between two output voltages: 5V or 12V
Input voltage: 7-28V (2-6S)Current output: 3AOutput voltage: 5V/12V (switch)Operating ..
12.21€
Ex Tax:12.21€
Model: HK-SB-12S
The all new Multistar twin output SBEC is an advanced switching DC-DC regulator designed specifically with multirotors in mind.It will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V. It works with 2-13 cell lipoly packs and supplies an interference free constant 5V to your receiver a..
30.25€
Ex Tax:30.25€
Model: rpmax-bec
A versatile device that converts a high input voltage from say a flight battery into a selectable (3 setting), stable output voltage and a maximum of 5A current. Useful for all types of model but particularly multi-rotors. Whether it powers the reciever, lights or other auxilliaries the choice is yo..
25.33€
Ex Tax:25.33€
Model: 9503007900
Hot glue gun with XT60 connector.
Delivered with 1 x glue stick.
12V (3S)
Note: the gun does not have a circuit of cut, and will be able to damage the battery if the tension becomes too low, we advise you to use a buzzer alarm..
6.48€
Ex Tax:6.48€
Brand: iFlight
Model: B012912
This BEC module from Iflight offers the possibility of switching from an input voltage of up to 35V to a stable voltage.
It makes it possible to reach an output current of 2A/3A on a wide supply voltage (6 to 35V).
..
8.93€
Ex Tax:8.93€
Brand: Matek
Model: BEC12S-PRO
The BEC12S PRO has a wide operating input range of 9 to 55V with TVS protection.
With a weight of 5g, it offers three output voltage options (5.2V/8V/12V)...
19.59€
Ex Tax:19.59€
Brand: Matek
Model: FCHUB-12S-V2
Designed for the XClass, the second version of the Matek FCHUB-12S 440A PDB with 5/12V BEC has an 8pin JST-SH connector as well as a 1K:20K voltage divider.
PDB
Input voltage range: 8~60V..
28.61€
Ex Tax:28.61€
Brand: Matek
Model: MBEC12S
This is the Matek Micro BEC with a wide voltage of 6-60V to 5/9 / 12V...
8.93€
Ex Tax:8.93€
Brand: Flywoo
Model: LED1
Flexible, reliable, durable and very bright LED intended for Flywoo"s CineRace20 mainly but compatible on other whoops.
Bullet points
..
15.49€
Ex Tax:15.49€