%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: MULTITOOL-NINJA
This tool will allow you to test your LiPos from 1S to 12S as well as your servos if you are a fan of flying wings.
The tester is equipped with two plugs for servos (1 input / 1 output), pins for balance plugs for your LiPo batteries, a wheel for scrolling through the menu and a color screen.
This m..
17.95€
Ex Tax:17.95€
Model: X-FW080012-E1D1-01
This Flycolor single ESC has aluminum heat sinks, multiple protections (current, temperature etc...) and supports all Dshot and Proshot protocols.
Equipped with the ARM 32-bit Cortex MCU, the X Cross 80A supports frequency up to 64MHz, which is 25% higher than the previous generation MCU.
Specif..
71.23€
Ex Tax:71.23€
Model: CINE80A-12S-TMOTOR
New T-Motor Cine 80A individual ESC for cinelifters.
It supports BLHeli_32 and is 5-12S compatible.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
Bullet points
Tested under 12S voltage, 80A maintains output for 30s
Only 31.2g
Power den..
120.41€
Ex Tax:120.41€
Model: HM-SB
HiModel 6-50V Input 20A Large Current Switching Mode Voltage Regulator/ SBEC
HiModel 20A SBECInput: 6 - 50.4 VOutput voltage: 7.4V 8.4V 9V 12V OUTPUT (jumper selection)Current: 20amps continuous/ 25amps peak (2 seconds)Mode: Switch-modeQuiescent current: 60uA to 200uASize: 45 x 26 x 8mmWeight: 30g..
30.25€
Ex Tax:30.25€
Brand: Gens Ace / Tattu
Model: GA-TA-1200
This charger is capable of charging 2 sets of lithium batteries simultaneously. The maximum power output is 1200 watts per channel. User can select between Charging mode and Maintenance mode. The charging current is adjustable between 10A, 20A and 30A. It also has over-current, over charging, over t..
739.26€
Ex Tax:739.26€
Brand: Gens Ace / Tattu
Model: GA-T-16-C12S
Tattu Plus 1.0 Compact version 16000mAh 12S 15C 44.4V Lipo battery pack with XT90-S Plug is suitable for Freefly AltaX, agricultural spraying drone, security mapping, power inspection and other industries. The whole system includes data acquisition, security warning, power calculation, automatic equ..
597.46€
Ex Tax:597.46€
Model: DJI-P4-CW
Phantom 4 series- 2312S Motor CW (Part No.24)..
19.59€
Ex Tax:19.59€
Model: rpmax-bec
A versatile device that converts a high input voltage from say a flight battery into a selectable (3 setting), stable output voltage and a maximum of 5A current. Useful for all types of model but particularly multi-rotors. Whether it powers the reciever, lights or other auxilliaries the choice is yo..
25.33€
Ex Tax:25.33€
Brand: Matek
Model: PM12S-3
The PM12S module has a wide operating input range of 9 to 55V with TVS protection.
With a weight of 53g, it is equipped with a Vx BEC, a 5V BEC as well as a 12V BEC...
49.10€
Ex Tax:49.10€
Brand: Matek
Model: BEC12S-PRO
The BEC12S PRO has a wide operating input range of 9 to 55V with TVS protection.
With a weight of 5g, it offers three output voltage options (5.2V/8V/12V)...
19.59€
Ex Tax:19.59€
Brand: Matek
Model: FCHUB-12S-V2
Designed for the XClass, the second version of the Matek FCHUB-12S 440A PDB with 5/12V BEC has an 8pin JST-SH connector as well as a 1K:20K voltage divider.
PDB
Input voltage range: 8~60V..
28.61€
Ex Tax:28.61€