Search Criteria
Products meeting the search criteria
Model: 01040016_1
BetaFPV"s G473 brushless AIO is the first 1S using the STM32G473CEU6.
Equipped with the ICM42688P gyroscope, 5A ESC and 5.8G 25-400mW VTX, this AIO is very lightweight and will allow you to manage your drone"s posture and movement precisely to a higher level.
This is the advanced choice for future u..
43.36€
Ex Tax:43.36€
Model: FINBU01
Flywoo"s Buzzer Finder V1.0 has two operating modes:
Traditional active buzzer function and synchronized with HR
When the FC is connected normally and the battery is turned off, the finder V1.0 can still automatically output 100dB and the LED will emit white light.
To deactivate the buzzer, pres..
8.93€
Ex Tax:8.93€
Model: PMPC5131.0-3
Set of 4 3-blade GEMFAN 5131.0 props.
Specifications
Size: 5.1"
Pitch: 3.1inch
Material: PC
Weight: ~4.42 (unit)
Shaft: M5
Diameter: 128mm
Hub thickness: 6.65mm
Max blade width : 16.03mm
Included
2x CW 5131.0-3 prop
2x CCW 5131.0-3 prop
Voir plus..
3.20€
Ex Tax:3.20€
Brand: T-Motor
Model: TM-A-60HV-2-1
Demo, used v 1.0 Alpha 60 esc with MN701 kv135 firmware, we had them on 2 demo drones for test only.
T-motor Alpha 60A HV Esc, now you can install your own firmware with DATALINK+Wifi programmer. (default firmware installed)..
39.26€
Ex Tax:39.26€
Brand: Gens Ace / Tattu
Model: GA-T-16-C12S
Tattu Plus 1.0 Compact version 16000mAh 12S 15C 44.4V Lipo battery pack with XT90-S Plug is suitable for Freefly AltaX, agricultural spraying drone, security mapping, power inspection and other industries. The whole system includes data acquisition, security warning, power calculation, automatic equ..
597.46€
Ex Tax:597.46€
Model: KIT-CONN-JSTSH
Assortment of red and black heat shrink tubing.
Practical and complete, this cable kit has all the connectors you need for your electronic components.
You won"t need any tools since these ca..
17.95€
Ex Tax:17.95€
Brand: TBS
Model: TBS-SOLDER
TeamBlackSheep Solder is spec"d accordingly to our Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional.
SPECIFICATIO..
4.02€
Ex Tax:4.02€
Model: ETAIN-1MM-NT
This NinjaTech solder is easy to solder and ensures pleasant and professional use during your assemblies.
Specifications
Type: Leaded..
7.30€
Ex Tax:7.30€
Brand: Flywoo
Model: BQ01
This is the Flywoo BQNANO V1.0.
If your FC board has a barometer, you need to disconnect the Baro SDA / SCL pad.
Specifications
Baro..
11.39€
Ex Tax:11.39€
You have reached the end of the list.
Showing 1 to 9 of 9 (1 Pages)