







- Stock: In Stock in 3 days
- Model: W4-FW060006-M1F7-HW1
This Flycolor stack consists of an F722 flight controller and a 4in1 60A ESC.
With 30.5x30.5mm mounting holes, it supports 3-6S LiPo voltage and is capable of handling 60A continuous current.
FC
- Betaflight firmware: STM32F7X2(Config file:FLYCOLORF7MINI)
- Betaflight board: FLYCOLORF7MINI.
- INAV firmware is supported:FLYCOLORF7MINI
- MCU: STM32F722.
- USB: Type C.
- Gyro: MPU-6500 SPI.
- Voltage output: 3.3V/0.1A、5V/3A 、9V/1.5A.
- Dual VTX and dual LED pads for convenient selection nearby.
- Const Curr.: 60A
- Burst Curr.: 70A
- FC BEC: 3.3V5V9V
- Lipo: 3-6S
- Weight: 23G
- Size(mm):44*36
ESC
- MCU STM32G0 ,ARM 32-bit Cortex MCU, frequency up to 64 MHz.
- ESC firmware: Flycolor_Raptor_5.
- Configurator for ESC Parameter setting and upgrading : BLHeliSuite32.
- Mounting holes: 20x20mm,M3.
- PWM frequency up to 128K.
- MOSFET with high performance and low Rds , not afraid of large current, more suitable for rapid flight
- Miniaturized and lightweight design, better routing and component layout.
- Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
- The code supports regular 1-2ms pulse width input, as well as Oneshot125 , Oneshot42 and *Multishot.
- All Dshot and Proshot signals are supported.
Included
- 1x Raptor 5 Mini 4in1 ESC
- 1x F7 Mini 2 Flight Control
- 1x ESC /FC connecting wire
- 1x Power wire(XT60)
- 1x Electrolytic capacitor
- 1x Set of 3mm mounting Accessories
Find the product you want and add it to your cart. A window will open, offering you two options - to continue shopping or to complete the purchase. Choose what suits you.
When you have selected everything you need, carefully examine the basket, then click on the "continue to enter information" button. Choose from the options: natural or legal person. First, you will need to enter information, depending on whether you are a natural person or a company. If you are ordering or buying as a legal entity, i.e. a company registered in Slovenia as well as the EU, you must enter the following:
- Company name
- The exact address of the company
- tax number
- Mandatory phone number (delivery service)
Choose a payment method:
- In summary
- TRR
- Paypal
- Leanpay
At the very end, carefully read the information about your order and confirm your choice.
The package will arrive at your address within 1-3 working days.
Products are delivered by the GLS delivery service. Upon delivery, the delivery man of the GLS delivery service will call you and arrange with you to pick up the package. The package will be delivered to the address you specified when ordering.
You can choose between three payment methods:
- Via the online bank or according to the estimate
- PayPal*
- Cash on delivery
- Lean pay
If the value of the package is less than €50, delivery within Slovenia via the delivery service is €5.90. For purchases over €50, delivery within Slovenia is free.
The delivery amount is calculated at the end of the purchase.
Unfortunately, discounts and benefits in our online store do not add up. You can only use one discount code per order.
If you want to go through the return process, we kindly ask you to fill out the form here.
If, within 15 days of purchase, the customer finds that he does not want the product for any reason, he must bring the product to us in its original packaging, undamaged, UNACTIVATED with the invoice. In such a case, we return the purchase price to the customer.
If within 15 days of purchase the customer finds that there is something wrong with the product (drone), bring the product to us or you return it in the original packaging with all the contents that were in it. In such a case, we replace the customer's drone with a new one. The product can be returned in its original packaging, undamaged, with a receipt.
After 15 days, the warranty process expires. We send the product to a DJI authorized official service center. We receive the replaced product within 7-10 working days.
The warranty starts from the activation of the drone and not from the purchase of it. You do not need an account to claim the warranty.
Service at an authorized DJI drone service center takes 7-10 working days. Because DJI has high safety standards, they exchange drones for new ones and do not repair them.
Yes, you can visit our store, where we will be happy to help you and present the product.
To rent products, please go to our website:rent.onedrone.com/storeor visit our store.
Contact us and we guarantee that you will receive all the necessary information.
Call us at the number:041 688 150
But contact us via e-mail:info@onedrone.si