![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: Matek
Model: PM12S-3
The PM12S module has a wide operating input range of 9 to 55V with TVS protection.
With a weight of 53g, it is equipped with a Vx BEC, a 5V BEC as well as a 12V BEC...
49.10€
Ex Tax:49.10€
Brand: Matek
Model: BEC12S-PRO
The BEC12S PRO has a wide operating input range of 9 to 55V with TVS protection.
With a weight of 5g, it offers three output voltage options (5.2V/8V/12V)...
19.59€
Ex Tax:19.59€
Brand: Matek
Model: FCHUB-12S-V2
Designed for the XClass, the second version of the Matek FCHUB-12S 440A PDB with 5/12V BEC has an 8pin JST-SH connector as well as a 1K:20K voltage divider.
PDB
Input voltage range: 8~60V..
28.61€
Ex Tax:28.61€
Model: SKY-150731
This compact Skystars voltage regulator takes an input of 4 to 36 Volts and steps the voltage down to 9V.
Specifications
Input volta..
8.11€
Ex Tax:8.11€
Brand: Matek
Model: MBEC12S
This is the Matek Micro BEC with a wide voltage of 6-60V to 5/9 / 12V...
8.93€
Ex Tax:8.93€
Model: MENACE-COBDRIVER-LED
Perfect for racing vision and freestyle, this CobDRIVER V2 from MenaceRC converts the power of your battery model into the power needed for the LEDs. This led controller can be configured from 2 to 8 leds depending on the light you want.
Take advantage of a pack including the CobDRIVER V2 and a Cob ..
13.03€
Ex Tax:13.03€
Model: MENACE-COBDRIVER
Perfect for racing vision and freestyle, this CobDRIVER V2 from MenaceRC converts the power of your battery model into the power needed for the LEDs. This led controller can be configured from 2 to 8 leds depending on the light you want.
..
7.30€
Ex Tax:7.30€
Brand: Flywoo
Model: LED1
Flexible, reliable, durable and very bright LED intended for Flywoo"s CineRace20 mainly but compatible on other whoops.
Bullet points
..
15.49€
Ex Tax:15.49€
Brand: Lawmate
Model: 18931
This power distribution board is designed to handle all the power that goes into your Cinelifter. The PDB offers many pad options to do a clean build.
..
8.93€
Ex Tax:8.93€
Brand: Mauch Electronic
Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..
43.36€
Ex Tax:43.36€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
45.82€
Ex Tax:45.82€
Brand: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
26.15€
Ex Tax:26.15€