![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: FF-AX-CCW-O
CCW Single Motor Propeller Set for Alta X (orange tip)
This pair of replacement counter-clockwise props for Alta X can be swapped out in the field if you have a damaged blade or blades on booms 1 or 3.
Props are supplied as a weight matched and balanced pair. Only fit props in the factory supplied p..
88.44€
Ex Tax:88.44€
Model: FF-AX-CW-O
CW Single Motor Propeller Set for Alta X (orange tip)
This pair of replacement counter-clockwise props for Alta X can be swapped out in the field if you have a damaged blade or blades on booms 1 or 3.
Props are supplied as a weight matched and balanced pair. Only fit props in the factory supplied pa..
88.44€
Ex Tax:88.44€
Model: DJI-M350-TB65
DJI Matrice 350 - TB65 Intelligent Flight BatteryThe TB65 Intelligent Flight Battery adopts high-performance and high-energy cells and can be charged up to 400 cycles, reducing the cost for a single flight. Meanwhile, it has enhanced heat dissipation performance and an auto-heating System.
SpecsCapa..
690.08€
Ex Tax:690.08€
Model: DJI-M350-BS65
DJI Matrice 350 - BS65 Battery Station
The battery station is a one-stop solution for battery charging, storage, and transport. The new Storage Mode and Ready-to-Fly Mode improve charging efficiency and extend the battery life. The new 360°-movement wheels facilitate more convenient transportation a..
1,020.41€
Ex Tax:1,020.41€
Out of stock
Brand: DJI
Model: DJI-M3P-P-CR2
DJI Care Refresh (Mavic 3 Pro) 2 Years (Card)
Duration 2 years
Up to 3 exchange units (upon payment of the exchange fee) within the term of Service
Rewards for Safe Use
Cost-free shipping and returns
Damage scenarios coveredWater damage, drop damage, flyaway
Included damage coverage forAircraft (i..
311.39€
Ex Tax:311.39€
Out of stock
Brand: Chasing
Model: CI-DLS
CHASING Distance Lock Sonar
CHASING Distance Lock Sonar is specially designed for CHASING M2 and CHASIGN M2 PRO ROV. It enables the ROV to achieve lock-distance inspection and automatic collision prevention, making various inspections more accurate and efficient.
Lock the Distance in Four Direct..
1,230.25€
Ex Tax:1,230.25€
Model: FF-AX-VIRK
Replacement parts kit for wear parts on Alta X.
Includes two changes of pan isolators and one set of isolation structure rubber bumpers (can also be used to replace ActiveBlade bumpers*).
Instructions for inspection intervals can be found in the Alta X Wiki.
*Black and gray components are the sa..
23.69€
Ex Tax:23.69€
Hot
Brand: Gremsy
Model: GR-MIO-DA
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-frequency vibration and allow smooth footage. The Mio Damping features ultra-lightweight in a small form factor and flexibility to be mounted on various..
199.92€
Ex Tax:199.92€
Brand: Gens Ace / Tattu
Model: GA-T-16-C12S
Tattu Plus 1.0 Compact version 16000mAh 12S 15C 44.4V Lipo battery pack with XT90-S Plug is suitable for Freefly AltaX, agricultural spraying drone, security mapping, power inspection and other industries. The whole system includes data acquisition, security warning, power calculation, automatic equ..
610.57€
Ex Tax:610.57€
Out of stock
Brand: Chasing
Model: CI-M2-EW
Delivery time 10-14 days after order.
Chasing M2 Electric winder with cable 200m..
918.77€
Ex Tax:918.77€
Out of stock
Brand: Chasing
Model: CI-M2-R
CHASING Grabber Claw
The small and easy-to-install CHASING Grabber Claw has an adjustable grabbing force of up to 7 kg and is suitable for multiple uses such as sampling detection.
Up to 7 kg Grabbing Force
With maximum 7 kg grabbing force, the grabber claw can easily complete underwater operati..
459.75€
Ex Tax:459.75€
Out of stock
Model: FF-AX-SQRM
The Alta X Short Quick Release Mount allows Alta X users to mount Toad in the Hole equipped payloads or landing gear directly to the bottom / top of the Alta X bypassing the standard vibration isolation system.
For some use cases rigid mounting is desirable and this removes some weight to increase ..
135.16€
Ex Tax:135.16€