![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: KW-RED
The World’s First 4-View Media Machine. Black, anodized aluminum body.
What’s in the Box?RED HYDROGEN OneWall ChargerUSB CableQuick Start Guide
4-VIEW DISPLAY, LITBYLEIA
Light from beyond.
The RED HYDROGEN One and its 4-View Lightfield Display create an experience that goes beyond 3D—with no glasse..
608.90€ (From 16.19€ monthly)
Ex Tax:499.10€
Brand: ProfiCNC/HEX
Model: HX-CBLU-H7
Profi CNC/HEX Blue Cube H7 is made in the USA in an ITAR certified Factory in Fremond, CA. This edition is aimed at military and government.
Product DescriptionThe cube can be used with a range of carrier boards such as the Standard, mini or Kore.
2x CAN (pins reserved for a 3rd Can bus)2x I2C5..
599.90€ (From 15.95€ monthly)
Ex Tax:491.72€
Brand: Gremsy
Model: GR-PI-F
Cutting-edge technology fitting in just the hand palm, Pixy F is customizable to match perfectly with Flir Duo Pro R.
The system provides numerous capabilities in an almost weightless industrial-grade gimbal with instant setup and longer flight time. Low effort, high precision, superior performance...
1,367.90€ (From 36.40€ monthly)
Ex Tax:1,121.23€
Brand: DJI
Model: DJI-R2-ELS
Overview
This Ronin-S Extended Lens Support has a relatively wide adjustable length range. It is designed for use with both ordinary cameras and when the distance between the Ronin-S Camera Mounting Plate and the camera lens is relatively far (e.g., when mounting a Canon EOS-1D X Mark II camera). T..
20.90€
Ex Tax:17.13€
Brand: DJI
Model: DJI-R2-THB
Overview
Ronin-S Top Hotshoe Bracket is used to more securely mount a DLSR camera to the Ronin-S. It is recommended to mount the camera using a Top Hotshoe Bracket when mounting the gimbal on a car.Please click here to view the User Guide.
In the Box
Top Hotshoe Bracket × 1
Compatibility
Ro..
49.90€
Ex Tax:40.90€
Brand: DJI
Model: DJI-MA2-SC
[1] The DJI Smart Controller is compatible with any DJI drone that uses OcuSync 2.0. It will also be compatible with Mavic 2 Enterprise. To ensure compatibility, always make sure your aircraft is updated with the latest firmware.[2] These results were measured using the Mavic 2. Individual results m..
649.90€ (From 17.28€ monthly)
Ex Tax:532.70€
Model: GA-ML
Ultra light Micro Lipo 1S (4,2V) 600mA for powering R/C RX, parachute, servo, ...
Dimension: 40x22mm, weight few grams...
10.90€
Ex Tax:8.93€
Model: HK-SB-12S
The all new Multistar twin output SBEC is an advanced switching DC-DC regulator designed specifically with multirotors in mind.It will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V. It works with 2-13 cell lipoly packs and supplies an interference free constant 5V to your receiver a..
36.90€
Ex Tax:30.25€
Brand: Mauch Electronic
Model: MAU2-025
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 5.0V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x..
229.90€
Ex Tax:188.44€
Brand: Mauch Electronic
Model: MAU2-024
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 66mm x 1..
179.90€
Ex Tax:147.46€
Brand: ProfiCNC/HEX
Model: HX-CORE
FEATURES AT-A-GLANCEUp to 12-cell Lithium battery (50.4V)140A continuous current with 280A surgesPower and signal for ESCs conveniently located in corners12V navigation light power available at each cornerBuilt-in power distributionBuilt-in voltage and current senseRedundant power supplies for fligh..
349.90€ (From 11.88€ monthly)
Ex Tax:286.80€
Brand: ProfiCNC/HEX
Model: HX-MCB
Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller size and almost the same capability with Pixhawk 2.1 standard carrier board, it can better fit-in to those applications which have size limits. Also, it..
109.90€
Ex Tax:90.08€