![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: AR0056616
Feel every flight with the DJI RC Motion 3 remote control and effortlessly perform complex aerial acrobatic tricks. Novice drivers can now perform flips, drifts and other spectacular maneuvers.
Note: The DJI RC Motion 3 is compatible with the DJI Avata 2, DJI Air 3, DJI Mini 4 Pro drone but only if ..
94.90€
Ex Tax:77.79€
Model: AR0056499
The DJI RS 4 Stabilizer supports next-generation native vertical shooting with improved operational efficiency, enhanced stabilization performance, and an enhanced accessory ecosystem.
It offers solo filmmakers a more professional and efficient creative experience and a set of tools for telling comp..
639.90€ (From 17.01€ monthly)
Ex Tax:524.51€
Model: DJI-CARE-AVATA-1
DJI Care Refresh provides two replacement units per year for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first replacemen..
49.90€
Ex Tax:40.90€
Model: AR0056588
The DJI Focus Pro motor is an essential accessory for the DJI RS 4 stabilizer.
It allows controlling the lens focus via the dial or adjusting the lens zoom via the joystick, this smooth operation allows effective lens control.
Specifications
Transmitter power:..
146.90€
Ex Tax:120.41€
Model: AR0056623
Transport your DJI Avata 2 drone without any hassle with this DJI sling bag.
You can store the DJI Avata 2, the DJI Goggles 3, the DJI RC Motion 3 as well as the charging hub and your batteries there.
Included
1x Sling Bag
Note : Only the bag is included
Voir plus..
83.90€
Ex Tax:68.77€
Model: AR0056622
Set of ND8, ND16 and nD32 filters for the DJI Avata 2 drone.
The ND filter will reduce the amount of light that enters the camera sensor.
Specifications
Weight : 0.7g / filter
Compatibiltity : DJI Avata 2 drone
Diameter : 26*24mm
Included
1x ND8 filter
1x ND16 filter
1x ND32 filter
Note ..
62.90€
Ex Tax:51.56€
Model: SDC-XT60
Connected to the DJI Power Charging Station, this cable powers a battery charger or any other device with a male XT60 connector.
Specifications
Dimensions: 40cm
Connector: SDC
Output connector : XT60 female
Output voltage : 12 volts
Included
1x SDC to XT60 female 12v cable
Voir plus..
23.90€
Ex Tax:19.59€
Model: POWER1000-BAG
Ideal for transporting, storing and protecting the DJI Power 1000.
The carrying bag has space for all the necessary cabling.
Equipped with air vents and zips, no need to take the DJI Power 100 out to use it!
Specifications
Dimensions: 452 x 240 x 232 mm (L x W x H)
Compatibility: DJI Power 10..
104.90€
Ex Tax:85.98€
Model: DJI-CARE-AVATA2-2A
DJI Care Refresh provides up to 3 replacements over 2 years per for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first rep..
104.90€
Ex Tax:85.98€
Model: AR0056619
Increase the flight time of your DJI Avata 2 with this smart Li-Ion battery.
Enjoy a battery life of approximately 23 minutes thanks to the voltage of 14.76V and the capacity of 2150mAh.
4 LEDs and a button will allow you to know the battery charge status.
Specifications
Type: Li-Ion
Voltage: 1..
126.90€
Ex Tax:104.02€
Model: AR0056876
This adapter was designed by DJI to be able to connect the DJI Mic 2 to Sony cameras without using a 3.5mm TRS cable.
Its design allows it to be installed in the shoe of the Sony device where you can attach the DJI Mic 2 receiver.
As a result, the latter will be connected to the adapter interface an..
37.90€
Ex Tax:31.07€
Model: AR0056593
This quick release plate from DJI allows you to quickly and easily install your camera on DJI RS stabilizers.
This 2024 version brings an adjustable placement guide that fits below the camera to serve as a stop.
This mount is compatible with DJI RS 4, RS 4 Pro, RS 3, RS 3 Pro and RS 2 stabilizers.
..
13.90€
Ex Tax:11.39€