![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: FF-MXL-300
Ultra rigid 19mm x 300mm Carbon Lens Rod ensures that your camera and lens combination is as stiff as possible. Stabilizers perform the best when the camera and lens are rigidly mounted and move as one solid unit with no play of slop. Our 19mm carbon rods are a optimal mixture of lightweight and r..
75.90€
Ex Tax:62.21€
Model: FF-MXL-CP
XL Camera plate allows users to securely mount their camera to MōVI XL dovetail. It features a ARRI compatible lightweight design and adaptable camera mounting slots to accommodate a variety of camera bolt spacing and sizes. The system features a clamping lever to lock the plate to the dovetail as..
540.90€ (From 14.38€ monthly)
Ex Tax:443.36€
Model: FF-MP-13
Use this accessory to mount two accessories equipped with 13mm plugs to a single 13mm mount point. Great for mounting a monitor and video receiver on the MōVI Controller, Pilot, MōVI Ring Pro, Adjustable Monitor Mount Quick Release, Low Profile Handle, etc.
Features:
Compatible with all Freefly ..
96.90€
Ex Tax:79.43€
Brand: DJI
Model: DJI-IN2-NC
SERVICE PART: DJI Inspire 2 - Nose Cover (Part 1)..
13.90€
Ex Tax:11.39€
Brand: DJI
Model: DJI-IN2-GPSM
SERVICE PART: DJI Inspire 2 - GPS Modul (PART5)..
64.90€
Ex Tax:53.20€
Brand: DJI
Model: DJI-IN2-GPSC
SERVICE PART: DJI Inspire 2 - GPS Cover (PART 11)..
3.90€
Ex Tax:3.20€
Brand: DJI
Model: DJI-RG-P1
DJI Goggles Racing Edition - Pagoda Antenna (SMA Interface) (Part 1)
The Pagoda Antenna (SMA interface) is a 5.8 GHz Left Hand Circular Polarized (LHCP) omnidirectional antenna, which can be connected to Goggles RE"s SMA interface to obtain better result on signal reception by working with the built..
10.90€
Ex Tax:8.93€
Brand: Mauch Electronic
Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..
52.90€
Ex Tax:43.36€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
55.90€
Ex Tax:45.82€
Brand: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
31.90€
Ex Tax:26.15€
Brand: DJI
Model: DJI-RG-P6
DJI Goggles Racing Edition - OcuSync Pagoda Antenna SMA interface (Part 6)
Pagoda Antenna (MMCX Interface)/Pagoda Antenna (SMA Interface):The OcuSync Pagoda Antenna is a small 5.8 GHz single-frequency LHCP omnidirectional antenna designed for drone racing, which can be mounted on the Air Unit via th..
10.90€
Ex Tax:8.93€
Brand: DJI
Model: DJI-RG-P5
DJI Goggles Racing Edition - OcuSync Pagoda Antenna MMCX interface (Part 5)
Pagoda Antenna (MMCX Interface)/Pagoda Antenna (SMA Interface):The OcuSync Pagoda Antenna is a small 5.8 GHz single-frequency LHCP omnidirectional antenna designed for drone racing, which can be mounted on the Air Unit via t..
10.90€
Ex Tax:8.93€