Menu
Your Cart

F722 HD Pro3 30x30 Flight Controller - Skystars

F722 HD Pro3 30x30 Flight Controller - Skystars
F722 HD Pro3 30x30 Flight Controller - Skystars
F722 HD Pro3 30x30 Flight Controller - Skystars
F722 HD Pro3 30x30 Flight Controller - Skystars
F722 HD Pro3 30x30 Flight Controller - Skystars
Out of stock
F722 HD Pro3 30x30 Flight Controller - Skystars
F722 HD Pro3 30x30 Flight Controller - Skystars
F722 HD Pro3 30x30 Flight Controller - Skystars
F722 HD Pro3 30x30 Flight Controller - Skystars
F722 HD Pro3 30x30 Flight Controller - Skystars
F722 HD Pro3 30x30 Flight Controller - Skystars

Payment in installments via Lean pay: easy, 100% digital, the fastest way to buy the desired product Lean Pay Logo

Card payment via Paypal allows you to pay with credit cards with or without a PayPal user account
47.46€
Ex Tax: 47.46€
  • Stock: Out of stock
  • Model: SKY-150707
2 sold
90 views
Tags: F722 , HD , Pro3 , 30x30 , Flight , Controller , - , Skystars

The Skystars F722 HD Pro3, DJI FPV compatible, has a BMI270 gyroscope, an 8MB blackbox and a 5V/3A & 10V/3A BEC.

f722 hd pro 3

FC Specifications

  • MCU: STM32F722RGT6 216MHz
  • Gyroscope: BMI270 
  • Baro:Bmp280
  • OSD: Betaflight SPI OSD  DJI HD OSD(UART6)
  • Black box: 16MB
  • 6x Uarts: UART 1/2/3/4/5/6
  • 4x PWM outputs
  • 1x I2C
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • USB Type-C(USB2.0)
  • 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
  • 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
  • VTX 10V/Vbat filtered power ON/OFF switch
  • DJI FPV OSD is supported by any spare UART
  • LED: 4 LED independent pads, support WS2812 programming lamp output.
  • Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.
  • Input voltage: 3-6S
  • BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
  • LDO 3.3V: Max.250mA
  • BetaFlight firmware: SKYSTARSF722Pro
  • INAV firmware:SKYSTARSF722HD
  • Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
  • External size 39mm × 39mm
  • Flight control weight: 6.9g
  • Flight control onboard voltage sensor.

Included

  • 1x F722 HD Pro3 FC
  • 4x Dampers
  • 1x JST SH1.0mm Cable for Air Unit
  • 2x JST SH1.0 cable for ESC
Voir plus

Write a review

Note: HTML is not translated!
Bad Good
Captcha

Find the product you want and add it to your cart. A window will open, offering you two options - to continue shopping or to complete the purchase. Choose what suits you.

When you have selected everything you need, carefully examine the basket, then click on the "continue to enter information" button. Choose from the options: natural or legal person. First, you will need to enter information, depending on whether you are a natural person or a company. If you are ordering or buying as a legal entity, i.e. a company registered in Slovenia as well as the EU, you must enter the following:

  • Company name
  • The exact address of the company
  • tax number
  • Mandatory phone number (delivery service)

Choose a payment method:

  • In summary
  • TRR
  • Paypal
  • Leanpay

At the very end, carefully read the information about your order and confirm your choice.

The package will arrive at your address within 1-3 working days.

Products are delivered by the GLS delivery service. Upon delivery, the delivery man of the GLS delivery service will call you and arrange with you to pick up the package. The package will be delivered to the address you specified when ordering.

You can choose between three payment methods:

  • Via the online bank or according to the estimate
  • PayPal*
  • Cash on delivery
  • Lean pay

If the value of the package is less than €50, delivery within Slovenia via the delivery service is €5.90. For purchases over €50, delivery within Slovenia is free.

The delivery amount is calculated at the end of the purchase.

Unfortunately, discounts and benefits in our online store do not add up. You can only use one discount code per order.

If you want to go through the return process, we kindly ask you to fill out the form here.

If, within 15 days of purchase, the customer finds that he does not want the product for any reason, he must bring the product to us in its original packaging, undamaged, UNACTIVATED with the invoice. In such a case, we return the purchase price to the customer.

If within 15 days of purchase the customer finds that there is something wrong with the product (drone), bring the product to us or you return it in the original packaging with all the contents that were in it. In such a case, we replace the customer's drone with a new one. The product can be returned in its original packaging, undamaged, with a receipt.

After 15 days, the warranty process expires. We send the product to a DJI authorized official service center. We receive the replaced product within 7-10 working days.

The warranty starts from the activation of the drone and not from the purchase of it. You do not need an account to claim the warranty.

Service at an authorized DJI drone service center takes 7-10 working days. Because DJI has high safety standards, they exchange drones for new ones and do not repair them.

Yes, you can visit our store, where we will be happy to help you and present the product.

To rent products, please go to our website:rent.onedrone.com/storeor visit our store.

Contact us and we guarantee that you will receive all the necessary information.

Call us at the number:041 688 150

But contact us via e-mail:info@onedrone.si