Menu
Your Cart

Double Quadro V3 - Cool

Double Quadro V3 - Cool
Double Quadro V3 - Cool
Based on 0 reviews. - Write a review
640.08€
Ex Tax: 640.08€
  • Stock: In Stock
  • Model: dq2xl
3769 views
or
Quick and easy instalment payment
From 17.04€
Your monthly instalment
Instalment calculation
Easy instalment purchases
I want to keep my instalment as low as possible
48 x 17.04€
I want to repay as soon as possible
3 x 231.70€
I want to choose my instalments
48 x 17.04€

Leanpay makes it easy to make instalment purchases online. Select Leanpay to pay by instalments in your basket. The informative calculation does not include the cost of the risk assessment.

Add to Cart
Buy Now Question
Add to Wish List Compare this Product
Tags: double , quadro , v3 , - , cool escs , /pdb

8 ESCs on two boards (for Oktos) with heat sink!  Extremely fast brushless controllers version V3 for our MikroKopter

IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki !

The board is tested and programmed (including bootloader)

power

  • voltage : 10 to 30V -> 3 -7S Lipo
  • 6 -layer PCB for optimal heat dissipation . 70u copper layers make the entire circuit board to the heat sink .
  • current: up to 60A (per BL-Unit) and 240A (all together) with appropriate cooling
  • current limiting and temperature limiting
  • Active freewheeling -> less power loss

Fast response with speed control

  • rapid acceleration and braking of the propeller. Active and seamless braking gives the speed precisely and quickly on the new setpoint .
  • return energy to the lipo when braking. Seamless transition from acceleration to braking
  • significantly faster control with speed control
  • Video

Other Features

  • Integrated Buzzer
  • Integrated 12V voltage regulator for external LED-Supply
  • Switchable LED output -> LEDs can flash in case of undervoltage
  • Adjustable motor timing in several steps of 13-28° - compatible with the most common BL motors
  • Adjustable switching frequency ( 10kHz - 20kHz )
  • PPM to 500 Hz with simultaneous I2C - bus operation for telemetry and data logging
  • Integrated 12V stabilization for LED lighting and other 12V appliances
  • Switchable outputs for lighting -> ZB The blinking lights at low voltage
  • Software adjustable direction of rotation
  • Adjustable current and temperature limits
  • Adjustable start-PWM
  • Silent Start: test tone at startup can be disabled

Interface

  • various interfaces for setpoint input ( I2C, PPM ( 500Hz ) , serial)
  • Integrated current measurement measurement of the actual current and the used capacity on the Mikrokopter control
  • voltage and temperature measurement with data transmission to the ground station and data logging
  • 11-bit resolution (2048 steps )
  • various feedback to the MikroKopter-FlightCtrl ( blocked motor , power limiting , etc. )
  • extented configuration options (eg current limit , temperature limit , ...)
  • two LEDs (OK and Error )
  • Adressable by loder-jumpers (address 1-8)
  • I2C bus access possible in PPM mode - for data logging and telemetry in PPM mode
  • status messages are transmitted to the FC ( engine blocks , Current, Self-test error ...)
  • current measurement up to 75A per controller
  • Convenient configuration of the BL controller via FC

mechanical data

  • hole: 3mm
  • Dimensions (W x H ): see documention in the Wiki
  • weight: ca. 260g

delivery

  • 2 SMD preassembled, programmed and tested boards already mounted and soldered
  • Lipo Power cable (open ends)
  • 1-line cable for LED output control

General Notice

  • The electronic components must be protected from moisture and humidity. When operating under such special conditions a corresponding (removable) protective coating must be used.

Links

Write a review

Note: HTML is not translated!
Bad Good
Captcha

Find the product you want and add it to your cart. A window will open, offering you two options - to continue shopping or to complete the purchase. Choose what suits you.

When you have selected everything you need, carefully examine the basket, then click on the "continue to enter information" button. Choose from the options: natural or legal person. First, you will need to enter information, depending on whether you are a natural person or a company. If you are ordering or buying as a legal entity, i.e. a company registered in Slovenia as well as the EU, you must enter the following:

  • Company name
  • The exact address of the company
  • tax number
  • Mandatory phone number (delivery service)

Choose a payment method:

  • In summary
  • TRR
  • Paypal
  • Leanpay

At the very end, carefully read the information about your order and confirm your choice.

The package will arrive at your address within 1-3 working days.

Products are delivered by the GLS delivery service. Upon delivery, the delivery man of the GLS delivery service will call you and arrange with you to pick up the package. The package will be delivered to the address you specified when ordering.

You can choose between three payment methods:

  • Via the online bank or according to the estimate
  • PayPal*
  • Cash on delivery
  • Lean pay

If the value of the package is less than €50, delivery within Slovenia via the delivery service is €5.90. For purchases over €50, delivery within Slovenia is free.

The delivery amount is calculated at the end of the purchase.

Unfortunately, discounts and benefits in our online store do not add up. You can only use one discount code per order.

If you want to go through the return process, we kindly ask you to fill out the form here.

If, within 15 days of purchase, the customer finds that he does not want the product for any reason, he must bring the product to us in its original packaging, undamaged, UNACTIVATED with the invoice. In such a case, we return the purchase price to the customer.

If within 15 days of purchase the customer finds that there is something wrong with the product (drone), bring the product to us or you return it in the original packaging with all the contents that were in it. In such a case, we replace the customer's drone with a new one. The product can be returned in its original packaging, undamaged, with a receipt.

After 15 days, the warranty process expires. We send the product to a DJI authorized official service center. We receive the replaced product within 7-10 working days.

The warranty starts from the activation of the drone and not from the purchase of it. You do not need an account to claim the warranty.

Service at an authorized DJI drone service center takes 7-10 working days. Because DJI has high safety standards, they exchange drones for new ones and do not repair them.

Yes, you can visit our store, where we will be happy to help you and present the product.

To rent products, please go to our website:rent.onedrone.com/storeor visit our store.

Contact us and we guarantee that you will receive all the necessary information.

Call us at the number:041 688 150

But contact us via e-mail:info@onedrone.si