![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: Mauch Electronic
Model: MAU2-060
Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6P / L = 200mm
To connect Power-Cube output 1 to Pixhawk 2.1 Power 1 connector.
REM: This cable is standard delivery with any Power-Cube !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-062
Power-Cube / 5.3V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 5.3V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-063
Power-Cube / 12.0V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 12.0V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 3 and 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-072
50A - Current measurement sensor board, based on Allegro Hall Sensor ACS-50U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power th..
54.90€
Ex Tax:45.00€
Brand: Mauch Electronic
Model: MAU2-059
This switch connects to any Power-Cube "V3" or 030: 2x 200A PDB and acts like an manual power on/off control.
It isn"t just a "switch". There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off.
The switch has already an installed 3D print..
24.90€
Ex Tax:20.41€
Brand: Mauch Electronic
Model: MAU2-050
This cable connects a PL BEC to the Power 2 input on a Pixhawk 2.1.
Molex CLIK-Mate 2.0mm 6p / L = 150mm..
5.90€
Ex Tax:4.84€
Brand: Mauch Electronic
Model: MAU2-089
Mauch Standard Line Customized cable from Sensor Hub X2 to HS-xxx-xx Sensor Board
The cable is made of AWG28 silicone wires with original Hirose DF13 connectors.
The total cable length should not exceed 290mm.
The cables are "hand made" and electrical tested.
If no requested cable length is provided..
4.90€
Ex Tax:4.02€
Brand: Mauch Electronic
Model: MAU2-064
Mauch 064 - Power-Cube - V2 / HS-xxx-xx / Sensor Cable / DF13-6p / L = 200mm
Lenght: 200mm..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-065
Mauch 065 - Power Cube output cable JST-GH..
8.90€
Ex Tax:7.30€