%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: M000590
FlyFishRC"s 3500KV Flash 1804 motors, designed with meticulous attention to detail, performance and reliability are perfect for a 4S configuration.
Made for 3.5" frames, they offer increased power and thrust compared to 1404/1504 while maintaining a compact format.
These motors have been designed wi..
15.49€
Ex Tax:15.49€
Model: SB-F4MINI-STACK
New mini stack from SpeedyBee, the F405 mini BLHeli_S 35A.
This stack includes a F405 mini 20x20 flight controller equipped with an 8Mb blackbox, an ICM42688P gyroscope, a barometer, an OSD and supports Bluetooth.
4in1 35A BLHeli_S mini V2 ESC has DSHOT 300/600 ESC protocol and supports 3-6S voltage..
61.39€
Ex Tax:61.39€
Model: SKY-150759
The Skystars Uranus single ESC is a standalone ESC intended for freestyle drones and airplanes.
It supports 3-6S power supply and can handle current up to 35A.
Its BLHeli_32 firmware supports PWM frequency up to 128KHz, ensuring smooth motor operation even at high speeds.
Note : This ESC does not h..
13.03€
Ex Tax:13.03€
Model: GP106088
GEPRC"s AIO TAKER G4 35A adopts G473 main control.
Following market demands, the Type-C interface has been improved and everything has been optimized to make soldering easier.
The Taker G4 35A mounts in 25.5x25.5mm, has an ICM42688P gyro, AT7456Ev OSD, 5V 3A BEC and supports Dshot600, Oneshot and Mu..
55.66€
Ex Tax:55.66€
Model: JH61766
This Mamba MK5 F435 55A stack from Diatone has an ICM-42688P gyro, an OSD, a barometer as well as 5 UARTS.
The Mamba F55 BLHeli_S ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK5 F435 FC
MCU: 288 MHz AT32F43..
54.84€
Ex Tax:54.84€
Model: BF14874
FC Specifications
MCU: AT32F435CGU7
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFLIGHT_BLI..
69.59€
Ex Tax:69.59€
Model: UCELL DC1350/150C-6S
Dogcom has just launched its new battery series, the UCELL series is the perfect combination of quality and cheap.
Dogcom LiPo battery features high and stable quality, lower internal resistance and longer life cycle.
This 1350mAh 6S battery has a discharge rate of 150C (300C in burst) and has an XT..
26.97€
Ex Tax:26.97€
Model: 1351506PZ
CNHL Pizza edition Lipo battery in 1350mah 6S 150C.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharging and when they are generally used on a scale model.
Battery chargers must imperatively remain under the super..
35.16€
Ex Tax:35.16€
Model: DV6S1RC
Made in France, this 6S 4000mAh Li-Ion battery has been designed for use on FPV drones as part of Long Range.
The rectangular format is the one most commonly used, moreover, it offers you the possibility of putting two Li-Ion packs on the same drone for even more autonomy.
It consists of Samsung INR..
69.59€
Ex Tax:69.59€
Model: DV6S1PTI
Made in France, this 6S 4000mAh Li-Ion battery has been designed for use on FPV drones as part of Long Range.
Its triangular format provides better weight distribution across the entire drone.
It consists of Samsung INR 21700 batteries, a 6S balancing connector, an XT60 connector, a quality silicone..
69.59€
Ex Tax:69.59€
Model: FW19001041
This Flywoo battery charger has 6 independent ports that can be used simultaneously.
In addition to LEDs and audible sounds indicating charging status, the UP-S6 protects your batteries against reverse polarity and power surges.
Finally, the USB port also gives you the possibility of charging anothe..
20.41€
Ex Tax:20.41€
Model: HQPROP-R35-V2
Discover the ultra resistant HQProp Racing R35 propellers, cut for freestyle and racing.
Specifications
Propeller Diameter: 5.1inch
Pitch : 3.5
Blades : 3
Material : Poly Carbonate
Weight :4.2g
Hub Diameter :13.3mm
Hub Thickness:6.8mm
Shaft :5..
3.20€
Ex Tax:3.20€