Mauch PC - Series "V3" / Power-Switch

Mauch PC - Series "V3&quo...

This switch connects to any Power-Cube "V3" or 030: 2x 200A PDB and acts like an manual power on/off..

19.90€ Ex Tax: 16.31€

Mauch Premium Line PL 4-14S HYB-BEC / 2x 5.3V / 1x 5.0V

Mauch Premium Line PL 4-14S HY...

Input 4-14S LiPo / max. 60V.Output 2x 5.30V / 1x 5.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A o..

134.90€ Ex Tax: 110.57€

Mauch Premium Line PL 4-14S HYB-BEC / 2x 5.3V

Mauch Premium Line PL 4-14S HY...

Input 4-14S LiPo / max. 60V.Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output curr..

94.90€ Ex Tax: 77.79€

ProfiCNC/HEX Here + Base

ProfiCNC/HEX Here + Base ...

This is the Base module of Here+ RTK GNSS set. For a complete RTK solution, you will need both ..

369.90€ Ex Tax: 303.20€

ProfiCNC/HEX Here + V2 Rover

ProfiCNC/HEX Here + V2 Rover ...

This is the Rover module of Here+ RTK GNSS set.  F..

309.90€ Ex Tax: 254.02€

ProfiCNC/HEX Green Cube

ProfiCNC/HEX Green Cube...

INSIDE THE CUBE  An STM32F427 Rev 3 Flight management unit. (where the flight controller l..

189.90€ Ex Tax: 155.66€

Profi CNC/HEX Here GPS portable

Profi CNC/HEX Here GPS portabl...

Used for connecting Here GNSS or Here+ GNSS Rover to GPS 2 port in PH2.1 only useful when ..

2.90€ Ex Tax: 2.38€

ProfiCNC/HEX PH2.1 Cable set

ProfiCNC/HEX PH2.1 Cable set...

Cables for accessories are JST to DF13 cables which are compatible with old pixhawk accessories, suc..

19.90€ Ex Tax: 16.31€

Profi CNC/HEX Power Brick Mini

Profi CNC/HEX Power Brick Mini...


29.90€ Ex Tax: 24.51€

ProfiCNC/HEX TheCube

ProfiCNC/HEX TheCube


219.91€ Ex Tax: 180.25€

PSM (Power selection module)

PSM (Power selection module)...

Power inputs must be between 4.4v and 5.7vPower output is the same voltage as the selected input.Pow..

39.90€ Ex Tax: 32.70€

ProfiCNC/HEX Core (Multi-Rotor Carrier Board)

ProfiCNC/HEX Core (Multi-Rotor...

FEATURES AT-A-GLANCEUp to 12-cell Lithium battery (50.4V)140A continuous current with 280A surgesPow..

229.90€ Ex Tax: 188.44€

Profi CNC/HEX Mini Carrier Board

Profi CNC/HEX Mini Carrier Boa...

Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every vers..

64.90€ Ex Tax: 53.20€

DJI Matrice 600 Series - Power Source Hub Kit

DJI Matrice 600 Series - Power...

DJI Matrice 600 Pro (M600) - Power Source Hub KitPower Source Hub Kit as spare part for your DJI Mat..

42.70€ Ex Tax: 35.00€

Movi Wheels - Two Wheel in Case

Movi Wheels - Two Wheel in Cas...

State-of-the-art wheel controller connecting cutting edge cinema robotics with classic controls.Perf..

2.44€ Ex Tax: 2.00€

Showing 1 to 15 of 247 (17 Pages)