![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: Matek
Model: SAM-M10Q
The SAM-M10Q uses a multi-constellation GNSS module powered by u-blox SAM-M10Q-00B.
It supports simultaneous reception of four GNSS (GPS/GLONASS/BeiDou and Galileo).
The high gain patch antenna offers the best balance between performance and small size.
..
31.07€
Ex Tax:31.07€
Brand: Matek
Model: CAN-L4-3100
This CAN magnetometer from Matek is based on RM3100 firmware and ArudPilot AP_Periph.
RM3100 technology offers high resolution, low power consumption and limits signal noise.
..
35.98€
Ex Tax:35.98€
Brand: Matek
Model: CAN-L4-BM
Matek"s CAN-L4-BM is an ultra-precise digital power monitor based on TI INA239 firmware and ArduPilot AP_Periph
Any flight controller that supports the DroneCAN protocol will be able to easily get accurate current and voltage readings via CAN.
..
29.43€
Ex Tax:29.43€
Brand: Matek
Model: RTS-ASkit-Pix
The Matek Digital Airspeed Sensor ASPD-4525 features a ASPD-4525 sensor board, JST-GH to JST-GH 20cm silicon cable, pitot tube and a clear silicon tubing (40cm) to help monitor your wing"s airspeed !
Specifications• Board Supply voltage: 4~5.5V DC• Sensor: MS4525DO• Working current: 5mA• Output: I2C..
53.20€
Ex Tax:53.20€
Brand: Matek
Model: VD-M3
M3 spacers with soft mount integrated in soft silicone. Use as a standard male / female M3 spacer.
Dimensions: M3x7 + 4.5Weight: 2.5gSold by 4..
3.20€
Ex Tax:3.20€
Brand: Matek
Model: ELRS-R24-D
New receiver from Matek, the R24-D uses the ExpressLRS 2.4Ghz protocol.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
..
21.23€
Ex Tax:21.23€
Brand: Matek
Model: ELRS-R24-P6
New receiver from Matek, the R24-P6 uses the ExpressLRS 2.4Ghz protocol.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing...
15.49€
Ex Tax:15.49€
Brand: Matek
Model: ASPD-DLVR
The AIRSPEED SENSOR by Matek.
All sensors DLVR series is the best airspeed sensor ArduPilot currently support.
Specifications & Features
ArduPilot AP_Periph F303 CAN node
All sensors DL..
106.48€
Ex Tax:106.48€
Brand: Matek
Model: ASPD-4525
The Matek Digital Airspeed Sensor ASPD-4525 features a ASPD-4525 sensor board, JST-GH to JST-GH 20cm silicon cable, pitot tube and a clear silicon tubing (40cm) to help monitor your wing"s airspeed !
..
49.92€
Ex Tax:49.92€
Brand: Matek
Model: 3901-L0X
Matek System Optical Flow Lidar Sensor 3901-L0X Module Support INAV for RC Drone
Specifications
Optical Flow: PMW3901
Lidar: VL53L0X
Interface UART
Protocol: INAV MSP
Working Range: 8cm~20..
31.07€
Ex Tax:31.07€
Brand: Matek
Model: HCS-150A
This Matek current sensor helps prevent voltage and heat drops on components. It has an operating temperature ranging from -30 to 80°C and has a continuous current rating of up to 150A.
..
17.95€
Ex Tax:17.95€
Brand: Matek
Model: CRSF-PWM-C
Compatible with the CRSF Protocol only, this converter allows you to convert your Crossfire receiver to PWM protocol.
Featuring 6 PWM outputs with a frequency between 50-400Hz, 2x uarts for Receiver and GPS, compatibility with external current sensors and an upgradeable firmware, this PWM converter ..
11.39€
Ex Tax:11.39€