![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: pixtele
Improving range of telemtrz for 3 times or more.Right-angle SMA connector with a piano-wire whip, flexible enough to survive some serious abuse...
5.90€
Ex Tax:4.84€
Model: osmopart37
Osmo X5 Adapter Quick Start Guide
Start of delivery on Monday/Tuesday 6./7. june 2016
Note: Connect the communication ports on the Focus Remote Controller and the Osmo - X5 Adapter using the DJI Focus - Osmo Pro/RAW Adaptor Cable. Then, you can use the DJI Focus to control the aperture and focus of..
59.90€
Ex Tax:49.10€
Brand: Connex
Model: con-pros-tx
Amimon CONNEX ProSight - Latency-free 5GHz HD digital FPV System with camera (720p)
Preorders will be possible from June, 1st on. Delivery starts in July as stated by the manufacturer.
This is the transmitter only as a spare part for the Amimon ProSight FPV set.
If u want to be subdealer for this pr..
145.90€
Ex Tax:119.59€
Brand: Connex
Model: con-pros-cam
Amimon Connex ProSight - Digital HD FPV Camera 720p native 60 FPS
Features:
Native 720p60 Support
Wide Field Of View - 126 degrees
Custom White Balance Settings
Zero Delay Latency
Compatible with exiting ProSight Tx/Rx with FW upgrade
Default Lens 1.49mm
No HDR
In the Box: 1x Camera
If u want to ..
96.90€
Ex Tax:79.43€
Model: zaxis
The Osmo Z-Axis can significantly reduce vertical shaking from natural arm movements when walking or jogging. It is compatible with the Zenmuse X3 gimbal and camera. Note:
The Z-Axis is NOT intended for action sports that involve extreme movement or to be used with other non-DJI devices.
The Z-A..
149.90€
Ex Tax:122.87€
Model: part50
Osmo part 50
The DJI Battery (2 PIN) to DC Power Cable is used to connect a DJI device with a DC port and one of the following DJI Intelligent Batteries as a power supply for the device. Supported DJI Intelligent Battery Models PH3-4480mAh-15.2V (Phantom 3 Intelligent Flight Battery) TB47/TB48 (In..
6.90€
Ex Tax:5.66€
Model: part36
Osmo part 36
Replaces the Triple Mount Suction Cup Base on the Vehicle Mount. 1/4" screw thread allows users to attach different tools and accessories, like the Extension Rod. Note: When used with a camera, make sure that the base is unlocked to prevent scratching the camera...
49.90€
Ex Tax:40.90€
Model: part35
Osmo part 35
Replaces the Articulating Locking Arm on the Vehicle Mount. Can also be used with the Tripod to provide more stable support for the Osmo...
39.90€
Ex Tax:32.70€
Model: p4nd16
Specifically made for the DJI Phantom 4, this ND16 filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera"s aperture, exposure time and sensor sensitivity settings. Put more simply, the ND16 filter helps avo..
29.90€
Ex Tax:24.51€
Model: p4nd8
Specifically made for the DJI Phantom 4, this ND8 filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera"s aperture, exposure time and sensor sensitivity settings. Put more simply, the ND8 filter helps avoid..
29.90€
Ex Tax:24.51€
Brand: Yuneec
Model: LRKITYUN
Product Description
This kit is designed for all Yuneec quadcopters using the ST-10 and ST-10+ controller for ranges of 4,000 ft. Remember these antennas need to have the tips pointed at the quadcopter. What is included in this kit:
1x u.fl to rp-sma female cable (rg-178 coax) 9cm long (for 2.4ghz r..
84.90€
Ex Tax:69.59€