![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: GP106153
The AIO TAKER F411 12A has built-in ExpressLRS 2.4G 3.0 receiver, it is perfect for 1.2-2" whoops or even 3" Toothpicks.
It consists of a BMI270 gyro, an 8Mb blackbox and supports Dshot300/600, Oneshot, MultiShot and 1-2S LiPo/LiHV voltage.
Upon receiving your FC,please connect to USB and calibrate..
70.90€
Ex Tax:58.11€
Model: GP106088
GEPRC"s AIO TAKER G4 35A adopts G473 main control.
Following market demands, the Type-C interface has been improved and everything has been optimized to make soldering easier.
The Taker G4 35A mounts in 25.5x25.5mm, has an ICM42688P gyro, AT7456Ev OSD, 5V 3A BEC and supports Dshot600, Oneshot and Mu..
67.90€
Ex Tax:55.66€
Model: AXIS-AE2207-V2-1960
Second version of AxisFlying AE2207 motors, more durable, more resistant, more powerful!
No matter the location, time or environment, the AE2207 V2 will give you the best control and the best response speed to satisfy your thirst for flight, whether for proxy, juicy or bando freestyle.
Here is the 1..
21.90€
Ex Tax:17.95€
Model: SKY-150753
This AIO F405 40A from Skystars is mounted in 25.5x25.5mm and is powered by 3-6S LiPos.
Featuring an MPU6000 gyro, a 16Mb blackbox, a built-in barometer and a 5V 3A BEC, it is ideal for 3-4" whoops and light 5" whoops.
It is also equipped with an aluminum heat sink on each side to dissipate heat whi..
79.90€
Ex Tax:65.49€
Model: SKY-150755
The SkyStars F722 HD + KM65 stack includes an F722 HD 30x30 Pro4 flight controller with a MPU6000 gyro along with a KM65A BLHeli_32 3-6S 4in1 ESC to give your quad all the power it needs.
F722 HD Pro4 FC
MCU: STM32F722RGT6 216MHz
Gyroscope: MPU6000
Baro:Bmp280
OSD: Betaflight SPI OSD DJI HD O..
133.90€
Ex Tax:109.75€
Model: SKY-150756
The F722RS 20x20 flight controller is notably equipped with an OSD, an MPU6000 gyro and a 16MB blackbox.
Specifications
MCU: STM32F722RGT6 216MHz
IMU: MPU6000 (SPI)
OSD: Betaflight OSD & DJI HD OSD (UART6)
6 hardware UARTS (UART1,2,3,4,5,6)
Barometer: NO
Buzzer Pad: YES
5V 3A
Input Voltage: 3..
52.90€
Ex Tax:43.36€
Model: FINBU01
Flywoo"s Buzzer Finder V1.0 has two operating modes:
Traditional active buzzer function and synchronized with HR
When the FC is connected normally and the battery is turned off, the finder V1.0 can still automatically output 100dB and the LED will emit white light.
To deactivate the buzzer, pres..
10.90€
Ex Tax:8.93€
Model: JH61766
This Mamba MK5 F435 55A stack from Diatone has an ICM-42688P gyro, an OSD, a barometer as well as 5 UARTS.
The Mamba F55 BLHeli_S ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK5 F435 FC
MCU: 288 MHz AT32F43..
66.90€
Ex Tax:54.84€
Model: 01050011_1
The 2006 LAVA series brushless motors are designed for 6S 3.5" quads such as the Pavo35 from BetaFPV.
Combined with Gemfan D90S propellers, they will offer you flexible control through their agility and acceleration.
Specifications
KV: 2400KV
Maximum Power: 563.82W
Maximum Current: 23.49A
Colo..
26.90€
Ex Tax:22.05€
Model: GTSV3-1303-11500KV
The GTS V3 1303 in 11500KV from Rcinpower is a powerful race motor intended for Cinewhoops / Toothpicks from 2 to 3".
Specifications
KV: 11500
Configuration : 12N14P
Stator diameter : 13mm
Stator Length : 3.2mm
Shaft diameter : 1.5mm
Dimensions : 16.5*10.1mm (dia)
Weight : ~5.6g (with wire)
Id..
15.90€
Ex Tax:13.03€
Model: HARDLINE-2208-2000-UNIT
New series of Hard Line motors from Xnova with this 2208 intended for freestyle and cinematic.
Fully tested and precisely balanced, the motor is simple to tune, is efficient and has a new design with a fully aluminum-encased rotor.
Specifications
KV : 2000
No-Load current (@10V) : 1.6A
Weight ..
36.90€
Ex Tax:30.25€
Model: GTSV2-12025-11500KV
New powerful motor from Rcinpower, the GTS V2 1202.5 with 11500KV.
Specifications
KV: 11500
Configuration : 9N12P
Stator diameter : 10mm
Stator Length : 2.5mm
Shaft diameter (inner) : 2mm
Shaft diameter (external): 1.5mm
Dimensions : 15.95*9.1mm (dia)
Weight : ~3.9g
Idle current(5)@5V : 1.3A
N..
14.90€
Ex Tax:12.21€