![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: SB-F4MINI-STACK
New mini stack from SpeedyBee, the F405 mini BLHeli_S 35A.
This stack includes a F405 mini 20x20 flight controller equipped with an 8Mb blackbox, an ICM42688P gyroscope, a barometer, an OSD and supports Bluetooth.
4in1 35A BLHeli_S mini V2 ESC has DSHOT 300/600 ESC protocol and supports 3-6S voltage..
74.90€
Ex Tax:61.39€
Model: M9N-5883
M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrent..
57.90€
Ex Tax:47.46€
Model: 11069
Holybro"s Kakute F722 flight controller features a USB-C connector, an ICM42688-P gyro, a BMP280 barometer, 5 UARTs and a 9V/3A, 5V/2A, 3.3V/0.2A BEC.
Supporting 3-8S voltage, the flight controller mounts in 30.5x30.5mm and is compatible with both analog and digital VTX systems.
Upon receiving your..
53.90€
Ex Tax:44.18€
Model: F90-BELL
Replacement bell for F90 by T-Motor...
17.90€
Ex Tax:14.67€
Model: *V2306.5V2-BELL
Replacement bell for V2306.5 V2 by T-Motor...
10.90€
Ex Tax:8.93€
Model: GORILLA-30X30
This adapter allows the mounting of the Lucid 6S TBS stack on any 30x30mm frame.
Included
2x TBS Gorilla to 30x30 mounting adapter
4x M2x10 screw for stack mount
4x M3x6 screw for frame mount
Note : Stack not included
Voir plus..
5.90€
Ex Tax:4.84€
Model: GORILLA-20X20
This adapter allows the mounting of the Lucid 6S TBS stack on any 20x20mm frame.
Included
2x TBS Gorilla to 20x20 mounting adapter
4x M2x10 screw for stack mount
4x M3x6 screw for frame mount
Note : Stack not included
Voir plus..
5.90€
Ex Tax:4.84€
Model: C006559
Micro USB adapter L-Type male to female for flight controller.
Specification
Weight: 1.1g
Size: 27*9*12mm
Features
Micro USB Male to Female
L-type will be more convenient to change the direction of the data cable
Support data transmission, synchronization function
Voir plus..
3.90€
Ex Tax:3.20€
Model: GNB13008S120AHV
Gaoneng GNB HV batteries are light and powerful, the best possible ratio to optimize the capabilities of your drone.
This 8S 1300mAh battery has an XT60 connector.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharg..
50.90€
Ex Tax:41.72€
Model: TAA13008S13X6
Tattu R-Line Version 5.0 1050mAh 14.8V 150C 8S1P LiPo battery pack is the updated version of R-Line series. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V5 definitely dominate all your races.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be..
51.90€
Ex Tax:42.54€
Model: B008018
Set of 20 M3*7.5mm dampers helping to reduce vibrations.
Dimensions:
Height: 7.5mm
Internal diameter: 3mm
External diameter: 6mm..
8.90€
Ex Tax:7.30€
Model: TBS-ETHIX-BELL-STOUT-V4-TUMBLED
Replacement motor bell for the Ethix V4 Stout Motors trumbled edition.
Included
1 x ETHIX Mr Steele Stout V4 Spare Bell
1 x Prop Nut
1 x M2 x 3mm screw (Bottom Screw)
Voir plus..
16.90€
Ex Tax:13.85€