Model: VCI-2306-1950KV
Discover Vulcan Innovation and its racing motors, the 24K 2306.
This 24K version in 1950KV is ideal for freestyle, it guarantees smoother operation and higher efficiency providing an immersive flight experience.
The VCI 2306 have an M5 nut shaft and will be perfect associated with Gemfan 51466 three..
21.90€
Ex Tax:17.95€
Model: VCI-2306-1850KV
Discover Vulcan Innovation and its racing motors, the Titan 2306.
This Titan version in 1850KV is ideal for freestyle, it guarantees smoother operation and higher efficiency providing an immersive flight experience.
The VCI 2306 have an M5 nut shaft and will be perfect associated with Gemfan F4S thr..
21.90€
Ex Tax:17.95€
Model: VCI-2207PRO-2100KV-SPARK
Discover Vulcan Innovation and its racing motors, the 2207 PRO.
This Spark version in 2100KV is an edition of motors made from quality materials such as 7075 aluminum or TC4 titanium alloy.
The VCI 2207 PRO have an M5 nut shaft and will be perfect combined with Gemfan 51466 three-blade propellers.
..
21.90€
Ex Tax:17.95€
Model: H7A3-SLIM
The Matek H7A3-SLIM flight controller is equipped with a SPL06-001 barometer, an AT7456E OSD, 6 UARTs and has a USB type C output.
Specifications
MCU: STM32H7A3RIT6, 280MHz Cortex-M7, 1.4MB RAM, 2MB Flash
IMU: ICM42688P
Baro: SPL06-001
OSD: AT7456E
Blackbox: 128MB Flash (1G-bit NAND)
6x Uarts ..
77.90€
Ex Tax:63.85€
Model: PM20S-2
The PM20S module has a wide operating input range of 9 to 85V with TVS protection.
With a weight of 63g, it is made with 100V DC components.
Specifications
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Vol..
68.90€
Ex Tax:56.48€
Model: CAN-G474
Matek"s CAN-G474 is a Node adapter based on ArduPilot AP-Periph firmware.
With this board, you will be able to more easily use ArduPilot to convert GNSS, Compass, barometers, airspeed sensor, PWM and buzzer devices to DroneCAN devices.
CAN-G474 has STM32G474 chip and 5Mbit/s transceiver.
Spec..
24.90€
Ex Tax:20.41€
Model: ITS-2208-1750KV
Unleash your potential with these new ITS 2208 motors born from the collaboration between IT"S FPV and T-Motor.
These premium 1750KV motors are designed to offer durability and performance. Their precision, power and flexibility will allow you to fly with absolute confidence.
6S compatible, ITS moto..
32.90€
Ex Tax:26.97€
Model: ITS-23065-1750KV
Unleash your potential with these new ITS 2306.5 motors born from the collaboration between IT"S FPV and T-Motor.
These premium 1750KV motors are designed to offer durability and performance. Their precision, power and flexibility will allow you to fly with absolute confidence.
6S compatible, ITS mo..
32.90€
Ex Tax:26.97€
Model: SKY-150725-HD4
The SkyStars F405 HD4 + KO55 Blheli_S Fly Tower Stack features the SkyStars F4 flight controller, as well as the KO55 55A 4-in-1 ESC to give your multirotor full power!
Specification FC
MCU: STM32F405
IMU: ICM42688P
OSD: OSD AT7456E
6 UARTs (UART1,2,3,4,5,6)
Blackbox: 16 MB
WS2812 Led Strip: Y..
91.90€
Ex Tax:75.33€
Model: KISS-FCFC-V2-MINI
Here is the much requested KISS FCFC Ultra Mini V2, the ultimate revision of the KISS by Fedorov experience.
This flight controller mounts in 20*20mm and is compatible with all systems (analog/HDZero/O3/Vista/Walksnail).
Specifications
20*20mm mounting holes
STM32H743 processor 480 MHz, 2MB FLA..
131.90€
Ex Tax:108.11€
Model: A-KULT-FCV2
Here is the much requested KISS FCFC Ultra V2, the ultimate revision of the KISS by Fedorov experience.
This flight controller mounts in 30.5*30.5mm and is compatible with all systems (analog/HDZero/O3/Vista/Walksnail).
Specifications
Iconic KISS “H” form factor 30.5x30.5mm mounting (With permi..
127.90€
Ex Tax:104.84€
Model: CANPDB-4A
This CANPDB from Matek will allow you to plug four CAN devices into one plug.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
6V to 55V Operating Input Range(2S-12S Li-xx)
5.2V output on “5V” p..
18.90€
Ex Tax:15.49€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)