![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: 21674
5inch arm intended for QAV-S 2 JohnnyFPV SE frame from Lumenier.
Note: The new QAV-S 2 arms will work with the original QAV-S, but the original QAV-S arms will not work with the new QAV-S 2.
Specifications
Compatibility : QAV-S 2 JohnnyFPV SE 5inch
Thickness : 6mm
Length : 5"
Included
1x A..
14.90€
Ex Tax:12.21€
Model: 21678
X-Lock kit intended for QAV-S 2 JohnnyFPV SE frames from Lumenier.
Specifications
Compatibility : QAV-S 2 JohnnyFPV SE 5-7inch
Made in Collaboration with FPV expert JohnnyFPV
Durable custom aluminum arm locking system
Made of High-Quality Lumenier components
Allows for folding of arms for stor..
29.90€
Ex Tax:24.51€
Model: VALKYRIE-HARDWARE
Hardware set for the Valkyrie frame from Parallax.
Included
1x Hardware set
Voir plus..
8.90€
Ex Tax:7.30€
Model: 21680
Hardware kit intended for QAV-S 2 JohnnyFPV SE frames from Lumenier.
Specifications
Compatibility : QAV-S 2 JohnnyFPV SE 5-7inch
Included
1x Injection-Molded GoPro Mount
4x Knurled Standoff
1x 14 Gauge Silicon Wire (Pair - Red and Black)
2x 16mm x 220mm Lumenier Battery Strap
1x XT60E-M C..
28.90€
Ex Tax:23.69€
Model: APXDC-KEY-5-R0
Replacement CF ARM KEY for the ApexDC frame by ImpulseRC.
Voir plus..
4.90€
Ex Tax:4.02€
Model: TBSSOURCEV5-ARM7
DeadCat 7" arms for the TBS Source One 7" V5 frame.
Included
2 x TBS Source One V5 7inch front arms
2 x TBS Source One V5 7inch rear arms
Voir plus..
20.90€
Ex Tax:17.13€
Model: PJ000493
Arm for the GEPRC DoMain 3.6".
Included
1x Arm
Voir plus..
5.90€
Ex Tax:4.84€
Model: SB-F405WING-MINI
The F405 WING Mini flight controller from SpeedyBee is intended for airplanes as well as FPV quads.
Compatible with most HD and analog VTXs, this FC consists of an STM32F405 processor, an ICM-42688P gyroscope, an SPL006-001 barometer, an AT7456E OSD as well as 6 UARTS.
In addition to supporting INAV..
48.90€
Ex Tax:40.08€
Model: 3S20127--1
Canopy for the Mobula8 and the Moblite7 Walksnail from Happymodel.
Specifications
Material : PP
Weight : 1.4g
Color : Transparent black
Included
1x Canopy
Voir plus..
4.90€
Ex Tax:4.02€
Model: X-FW080012-E1D1-01
This Flycolor single ESC has aluminum heat sinks, multiple protections (current, temperature etc...) and supports all Dshot and Proshot protocols.
Equipped with the ARM 32-bit Cortex MCU, the X Cross 80A supports frequency up to 64MHz, which is 25% higher than the previous generation MCU.
Specif..
86.90€
Ex Tax:71.23€
Model: GTSV3-0703-27000KV
New brushless motors from Rcinpower, the GTS V3 0703 range features powerful motors in flashy colors.
These motors feature a double ball bearing design.
Here is the 0703 version in 27000KV.
Specifications
KV : 27000
Shaft : 1mm
Included
1x 0703 motor
Voir plus..
14.90€
Ex Tax:12.21€
Model: GTSV3-0703-23000KV
New brushless motors from Rcinpower, the GTS V3 0703 range features powerful motors in flashy colors.
These motors feature a double ball bearing design.
Here is the 0703 version in 23000KV.
Specifications
KV : 23000
Shaft : 1mm
Included
1x 0703 motor
Voir plus..
14.90€
Ex Tax:12.21€