![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: 0110003154
Replacement ExpressLRS 2.4G AIO for Tinyhawk III Plus.
Included
1x AIO
1x Power cable with capacitor
Voir plus..
69.90€
Ex Tax:57.30€
Model: 01130003_3
This set of 15 PEEK screws will allow you to reduce the weight of your whoop.
Stronger, stronger and more durable than nylon screws, these screws save up to 0.46g for construction using metal screws.
PEEK screws are therefore perfect for building 65/75mm whoops such as the Meteor.
Included
15x ..
8.90€
Ex Tax:7.30€
Model: AR0056499
The DJI RS 4 Stabilizer supports next-generation native vertical shooting with improved operational efficiency, enhanced stabilization performance, and an enhanced accessory ecosystem.
It offers solo filmmakers a more professional and efficient creative experience and a set of tools for telling comp..
639.90€
Ex Tax:524.51€
Model: AR0056623
Transport your DJI Avata 2 drone without any hassle with this DJI sling bag.
You can store the DJI Avata 2, the DJI Goggles 3, the DJI RC Motion 3 as well as the charging hub and your batteries there.
Included
1x Sling Bag
Note : Only the bag is included
Voir plus..
83.90€
Ex Tax:68.77€
Model: SDC-XT60
Connected to the DJI Power Charging Station, this cable powers a battery charger or any other device with a male XT60 connector.
Specifications
Dimensions: 40cm
Connector: SDC
Output connector : XT60 female
Output voltage : 12 volts
Included
1x SDC to XT60 female 12v cable
Voir plus..
23.90€
Ex Tax:19.59€
Model: POWER1000-BAG
Ideal for transporting, storing and protecting the DJI Power 1000.
The carrying bag has space for all the necessary cabling.
Equipped with air vents and zips, no need to take the DJI Power 100 out to use it!
Specifications
Dimensions: 452 x 240 x 232 mm (L x W x H)
Compatibility: DJI Power 10..
104.90€
Ex Tax:85.98€
Model: AR0056619
Increase the flight time of your DJI Avata 2 with this smart Li-Ion battery.
Enjoy a battery life of approximately 23 minutes thanks to the voltage of 14.76V and the capacity of 2150mAh.
4 LEDs and a button will allow you to know the battery charge status.
Specifications
Type: Li-Ion
Voltage: 1..
126.90€
Ex Tax:104.02€
Model: AR0056467
This 3.5mm TRS audio cable for DJI Mic 2 allows you to remove the receiver from your camera, while leaving it plugged in.
Included
1x Cable
Voir plus..
21.90€
Ex Tax:17.95€
Model: FW19002971
This DJI O3 Air Unit Connection Cable is designed to replace the easily damaged socket cable that connects the two circuit boards during the naked O3 assembly process.
This high quality cable guarantees a perfect fit and reliable connection between boards.
Made of premium quality materials, the cabl..
13.90€
Ex Tax:11.39€
Model: HEATSINK-O3-NINJA
This heatsink is for the DJI O3 Air Unit.
It enables improved cooling performance for the high power consumption of O3.
Included
1x Heatsink
4x Screw
1x Thermal grease
Note : DJI O3 VTX not included
Voir plus..
5.90€
Ex Tax:4.84€
Model: AR0056621
This hub for the smart batteries of the DJI Avata 2 drone will allow you to charge 3 batteries in sequence (one after the other).
Specifications
Input: 5-20V, 3A max.
Output (energy accumulation): 65W max.
Output (charging): 17V max.
Output (USB): 5V, 2A
Charging type: Charges three batteries i..
63.90€
Ex Tax:52.38€
Model: DJIO3-HOLDER
This aluminum mount for DJI O3 allows good cooling of the VTX by increasing the heat dissipation space.
It mounts in 20x20mm using the mounting holes located inside.
Included
1x DJI O3 holder
5x M2*8mm coutersunk Screw
Voir plus..
3.90€
Ex Tax:3.20€