![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: Mauch Electronic
Model: MAU2-078
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
64.90€
Ex Tax:53.20€
Model: ins-m2m4-esc
Original Inspire 1 PRO Motor with adapter for motors M2 and M4 with ESC included.
DJI Inspire 1 V2.0 / Pro / RAW..
85.90€
Ex Tax:70.41€
Model: ins-m2-m4
Original Inspire 1 PRO Motor with adapter for motors M2 and M4.
DJI Inspire 1 V2.0 / Pro / RAW..
49.90€
Ex Tax:40.90€
Model: ins-lef-arm
Inspire 1 auxiliary LEFT arm component PART 11..
23.90€
Ex Tax:19.59€
Brand: Gremsy
Model: GR-FDCC
T1/T3 - Flir Duo Pro R Control Cable is used to connect:
- PWM1 and PWM2 Remote Control
- Power in 12VDC
- Analog Video Output
Specification:
Cable length: 120mm
T1/T3 - Flir Duo Pro R Control Cable Diagram..
35.90€
Ex Tax:29.43€
Model: DJI-RO2-LCC
Overview
The LANC Control Cable controls cameras with a LANC port, such as the BMCC, Sony FS5, or Sony FS7, by connecting them to the RSS port on the Ronin 2"s Power Hub.
In the Box
Ronin 2 LANC Control Cable ×1
Compatibility
Ronin 2..
99.90€
Ex Tax:81.89€
Model: DJI-M600-SRLBK
Matrice 600 Series Rear Light Board Kit - LED status..
46.90€
Ex Tax:38.44€
Model: DJI-M600-CGM
Matrice 600 Pro Collapsible Mount..
49.90€
Ex Tax:40.90€
Brand: DJI
Model: DJI-IN2-HC
DJI Focus - Handwheel 2 Cendence Remote Controller StandThe DJI Focus Handwheel 2 Cendence Remote Controller Stand can mount the DJI Focus Handwheel 2, DJI Focus Handwheel and DJI Focus. By allowing the Focus, Focus Handwheel 2, or Focus Handwheel to connect to the Cendence Remote Controller, you ca..
59.90€
Ex Tax:49.10€
Model: SKU007
Adicam Extra Bracket
Accessory crossbar dedicated to steadicam operators to hang the vest.
Our system is configured to be mounted on the narrow side of the cart, opposite to the swivel wheels. Extra bracket can be mount without removing the top shelf.
Our set includes:
1× extra bracket..
73.90€
Ex Tax:60.57€
Model: SKU006
Adicam Crossbar Clamps
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable for adapting 35mm or 40mm diameter tripods depending on customer preferences. Crossbar mountings can be mount without removing the top shelf.
In the case of heavy eq..
243.90€
Ex Tax:199.92€
Model: DJI-RO2-CBC
Overview
The CAN Bus Cable is used to connect the 14.4V Accessory Power Port on the Ronin 2 to the CAN1 port on a DJI A3 fight controller.
In the Box
Ronin 2 CAN BUS Cable ×1
Compatibility
Ronin 2
..
115.90€
Ex Tax:95.00€