![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: unilcdmount
Are you tired of screwing Monitor to Phantom remote, Camera on tripod, small LCD on Ronin or Movie, ....?
Kopterworx have solution for you:
Universal Quick release system for monitors, cameras, ....
For mounting and releasing u need 2 seconds.
..
36.90€
Ex Tax:30.25€
Model: mobileholderm
Mobile-grip-M for FPV Pult PRO - Phantom, Inspire, Ronin, Futaba ..
Can be used in almost all tablets.(Can use 96mm-140mm FPV Monitor & Tablet PC) * Include: Easy ball clamp 60mm , TX-Tray shaft ,SE-mobile-grip-M Total weight: 205g...
179.90€
Ex Tax:147.46€
Model: fpvpultmobileL
Mobile-grip-L for FPV Pult PRO - Phantom, Inspire, Ronin, Futaba ...
Material: aluminium 6061-T6 (anodized) Can be used in almost all tablets. (Can use ipad mini, ipad Air, iPad3, iPad4)
Total weight: 205g..
179.90€
Ex Tax:147.46€
Model: fpvpultjeti
FPV pult PRO - JETI DS-16 + cCarbon Sheets
Material: aluminium 6061-T6 (anodized) Only can use for JETI DS-16 Color: (Red & Ti-Silver)
INCLUDES: Tx-tray for JETI DS-16 , Carbon Sheet Total Weight: 250g..
170.90€
Ex Tax:140.08€
Model: failsafe
The micro failsafe is designed to return the throttle servo to a preset position in the event that radio signal is lost or the receiver battery voltage drops below a factory preset voltage (4.2V). It is recommended that half brakes be programmed as the failsafe position.
Weight (with cord) : 7 Grams..
7.90€
Ex Tax:6.48€
Model: FF-MXL-D
XL Dovetail allows users to attach XL Camera Plate to the gimbal. XL Dovetail bolts to the MōVI XL, and the XL camera plate attaches to it. XL dovetail features an ARRI compatible dovetail so users can seamlessly move camera from MoVI XL to other ARRI dovetail based setups. The dovetail was optimiz..
475.90€ (From 12.65€ monthly)
Ex Tax:390.08€
Model: hdmiminiflat
The world lighter and thinner mini flat to Hdmi cable, lenght 50 cm. weigh only few grams...
23.90€
Ex Tax:19.59€
Brand: DJI
Model: DJI-IN2-HR
Overview
Used to mount the DJI Focus Handwheel to the remote controller, enabling a single operator to adjust Zenmuse X5S focus more easily.
In the Box
Inspire 2 - DJI Focus Handwheel Remote Controller Stand ×1
Compatibility
Inspire 2DJI Focus HandwheelDJI Focus Handwheel - Inspire 2 RC CA..
59.90€
Ex Tax:49.10€
Model: 4216cw2
Specs
Stator Size: 42x16 mm KV: 310 rpm/V Weight: 195 g
In The Box
4216 Motor CW x1..
45.90€
Ex Tax:37.62€
Model: AA-PC90
Extra Soft Power cable for Alexa Mini - lenght 50 cm, specially made for gimbals.
Original connector is XT60, but we can install some other connector too...
133.90€
Ex Tax:109.75€
Model: FF-MP-L
This cable allows users to access their camera"s LANC commands. This allows users to start and stop camera recording as well as other LANC commands from up to 600+ feet away using the MōVI Controller. The cable features custom ultra thin and flexible cable.
Features
Custom high flex, lightweigh..
25.90€
Ex Tax:21.23€